邦讯 BS-WAP-O500/an无法进入WEB管理，也不知道IP是多少。
本帖最后由 wood1979 于 2014-3-15 22:42 编辑这个AP是在矿坛买的，到手后接错电源直接就挂了，主芯片AR7161-bc1a冒烟。网购了一块芯片安上后又冒烟，查出电源八脚芯片坏。都换了就正常了。无线能搜到1111，但是手机无法获取IP地址，还能找到一个隐藏的无线SSID。
连接网线用192.168.1.1无法进入WEB管理。也PING不通。
CONSOLE能看到正常启动，开始几行里显示
?VSC8601: did not find unit 1
Ethernet eth0: MAC address 00:03:7f:ff:ff:fe （这个MAC地址和外壳上的标的不一样。不知道为啥）
IP: 192.168.1.11/255.255.255.0, Gateway: 192.168.1.254
Default server: 192.168.1.136
按这几个地址都无效。无法连通。
AP网口状态灯看似正常，绿灯长亮，黄灯闪。
后问坛友，让我CTRL+C结束启动，我找到设置IP命令。并设置。但是一重启还是以前的IP。弄过H3C的AP好像最后有保存的命令。这个AP我没找到保存设置的命令。
RedBoot> help
Manage aliases kept in FLASH memory
alias name
Read AR7100 mii register
mii_rd mii_rd <unit> <phy_addr> <reg_offset>
Write AR7100 mii register
mii_wr mii_wr <unit> <phy_addr> <reg_offset> <data>
Read AR7100 register
ar7100_reg_rd ar7100_reg_r <reg_addr>
Write AR7100 register
ar7100_reg_wr ar7100_reg_wr <reg_addr> <val>
Set/Query the system console baud rate
baudrate [-b <rate>]
Move Atheros Board Data information
bdmove
Restore Atheros Board Data information
bdrestore
Manage machine caches
cache
Display/switch console channel
channel [-1|<channel number>]
Compute a 32bit checksum for a range of memory
cksum -b <location> -l <length>
Display (hex dump) a range of memory
dump -b <location> [-l <length>] [-s] [-1|2|4]
Execute an image
exec [-b <argv addr>] [-c "kernel command line"] [-w <timeout>]
[<entry point>]
Manage FLASH images
fis {cmds}
Manage configuration kept in FLASH memory
fconfig [-i] [-l] [-n] [-f] [-d] | [-d] nickname
Execute code at a location
go [-w <timeout>] [-c] [-n]
Help about help?
help [<topic>]
Display command history
history
Setange IP addresses
ip_address [-l <local_ip_address>[/<mask_len>]] [-h <server_address>]
Load a file
load [-r] [-v] [-d] [-h <host>] [-p <TCP port>][-m <varies>] [-c <channel_num
ber>]
[-b <base_address>] <file_name>
list directory contents
ls [-d directory]
Programs the mac address(es) into flash.Based on board serial number.Number of
MACs required depends on board type
progmac usage:
progmac serialno
serialno = board serial number in decimal
Compare two blocks of memory
mcmp -s <location> -d <location> -l <length> [-1|-2|-4]
Copy memory from one address to another
mcopy -s <location> -d <location> -l <length> [-1|-2|-4]
Fill a block of memory with a pattern
mfill -b <location> -l <length> -p <pattern> [-1|-2|-4]
Mount file system
mount [-d <device>] -t fstype
Network connectivity test
ping [-v] [-n <count>] [-l <length>] [-t <timeout>] [-r <rate>]
[-i <IP_addr>] -h <IP_addr>
Set pll configuration for AR7100 (default = 0)
ar7100_pll 0 - use chip rev
1 - 200/200/100
2 - 300/300/150
3 - 333/333/166
4 - 266/266/133
5 - 266/266/66
6 - 400/400/200
7 - 600/300/150
8- 680/340/170
Reset the system
reset
Unmount file system
umount
Display RedBoot version information
version
Display (hex dump) a range of memory
x -b <location> [-l <length>] [-s] [-1|2|4]
AP板子上有两按钮，一个按完就重新启动，一个按住没反应，但是在超级终端里过几秒就显示press the Restore key
press the Restore key
，怎么也不能恢复出厂，无线ID始终是111，不知道这个状态是否就是出厂状态。。晕。
现在我没没辙了，请大家有熟悉这个AP的帮我下，怎么能恢复出厂，并能进入WEB管里。不行的话怎么能重刷固件。
谁帮帮我啊。。。。。 我这有胖固件。mac地址是根据wlan模块认的。你加我qq347723944 我也有一块，不知是不是一样你的搞得怎么样了呀
lht800 发表于 2014-3-29 15:21 static/image/common/back.gif
我也有一块，不知是不是一样你的搞得怎么样了呀
和我的不一样。我的是无线模块是分离的。。。在等网友给我传编程器固件呢。 大神好厉害！！！
页:
[1]