雷凌 Ralink RT2870usb RT3070usb 支持注入的驱动
http://www.aircrack-ng.org/doku.php?id=rt2870http://forum.aircrack-ng.org/ind ... 6.msg25504#msg25504
http://forums.remote-exploit.org/bt4beta-non-working-hardware/20408-wirelesscards-rt2870-2860-chipsets.html
The steps (By apocolipse269) for getting it running are simple. BT4 comes with kernel.lzm (sources) already so extract with your prefered extraction method
navigate to the folder rt2870-2.6.28-apocolipse in terminal
then simply
Code:
make && make install
after that do a
Code:
modprobe rt2870sta
if you'd like to keep it on a persistant changes install and have it load on startup simply edit your /etc/modules.conf (or w/e it is in bt4 someone correct me if i'm wrong)
your card should come up in ifconfig and iwconfig as ra0
KNOWN ISSUES!!!
Driver currently has some channel problems. I'm not positive on all of the situations however it can be annoying.
example
Code:
airmon-ng -c 6 ra0
will not show any bssids on channel 6, instead to see bssids broadcasting on channel 6 you must do
Code:
airmon-ng -c 10 ra0
Look on channel 10, this can be a problem due to the fact that aireplay-ng will not do a fakeauth unless the card is on the correct channel. anyone using my driver please feel free to give me any information or situations around having any errors like this, i've only encountered it on ch 6/10 but if any others let me know (dont have too many essids around me to test :P )
Thanks hope you guys like the driver
(oh and a side note, shoudl work for rt2860 as well)
*** Thanks to apocolipse269***
这个不要钱:
http://www.filefactory.com/file/af31fg2/n/rt2870-2_6_28-apocolipse_tar_gz
喜欢搞的自己搞一下 (自己 build,make && make install):
可以支持 injection 了(这个 响应 Admin 号召收一金, 回贴一次回本回两次赚翻了)下载 + I7 ui6 \- P1 P 我每天看贴无数,基本上不回贴.后来发现这样很傻,很多比我注册晚的人分数都比我多,于是我就把这段文字保存在记事本里,每看一贴就复制粘贴一次，帮LZ把贴子顶上去。顺便挣点分。 顶一下楼主，最好做成LZM文件就可以了。 本帖最后由 vodka 于 2009-6-9 09:38 编辑
那就看看下面这个 lzm 吧 文件有这么大啊.应该是在BT4下吧. DDDDDDDDDDDDDDDDDDD 待定待定待定待定待定 可以用吗？我有疑问啊。 可以用吗？我有疑问啊。 观望,有没有小白鼠试成功LZM的? 試下一丫~有人OK嗎? 我的卡不知道能不能用，谢谢了先 要了试试，谢谢楼主啦你们赚了6元啦