3052芯片的路由器主板，送外壳。非常便宜，可拿来给新手练练手
本帖最后由 TaTaCr 于 2014-11-5 13:16 编辑如有疑问，请旺旺咨询。谢谢！货物名称:3052芯片的路由器主板，送外壳。非常便宜，可拿来给新手练练手。
数量:5
价格:25（不包含邮费）
物品缺陷及改动:主板上带有串口，无需在自己焊接。想刷什么可以自己试试。拍下主板，送外壳，需要拍外壳的连接。
有什么疑问可直接咨询。
三包或保修期:二手，无保修。
卖家所在地以及物品所在地:北京
淘宝、拍拍、ebay等类似中介交易连接:http://item.taobao.com/item.htm?id=42134098579
运输方式及运费:运费淘宝页面中已经写了，不同地区可以改邮费
付款方式:支付宝
我把硬件信息贴出来大家看看吧。U-Boot 1.1.3 (Mar8 2010 - 16:50:03)
Board: Ralink APSoC DRAM:64 MB
relocate_code Pointer at: 83fa8000
config usb..
flash_protect ON: from 0xBF000000 to 0xBF023187
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 10
============================================
Ralink UBoot Version: 3.2_a2
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM COMPONENT: 256Mbits
DRAM BUS: 32BIT
Total memory: 64 MBytes
Date:Mar8 2010Time:16:50:03
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 384 MHZ ####
SDRAM bus set to 32 bit
SDRAM size =64 Mbytes
GPIO REG: 80000000
GPIO DIR REG: 00ffbbff
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
6: To emergency.
9: Load Boot Loader code then write to Flash via TFTP.
0
3: System Boot system code via Flash.
## Booting image at bf050000 ...
Image Name: Linux Kernel Image
Created: 2012-07-0612:41:53 UTC
System Control Status = 0x00440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 4151344 Bytes =4 MB
Load Address: 80000000
Entry Point:802b0000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802b0000) ...
## Giving linux memsize in MB, 64
Starting kernel ...
本帖最后由 春の晴 于 2014-11-5 13:06 编辑
多大闪存/内存？这种闪存喜欢折腾的不多吧！
春の晴 发表于 2014-11-5 13:03
多大闪存/内存？这种闪存喜欢折腾的不多吧！
U-Boot 1.1.3 (Mar8 2010 - 16:50:03)
Board: Ralink APSoC DRAM:64 MB
relocate_code Pointer at: 83fa8000
config usb..
flash_protect ON: from 0xBF000000 to 0xBF023187
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 10
============================================
Ralink UBoot Version: 3.2_a2
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM COMPONENT: 256Mbits
DRAM BUS: 32BIT
Total memory: 64 MBytes
Date:Mar8 2010Time:16:50:03
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 384 MHZ ####
SDRAM bus set to 32 bit
SDRAM size =64 Mbytes
GPIO REG: 80000000
GPIO DIR REG: 00ffbbff
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
6: To emergency.
9: Load Boot Loader code then write to Flash via TFTP.
0
3: System Boot system code via Flash.
## Booting image at bf050000 ...
Image Name: Linux Kernel Image
Created: 2012-07-0612:41:53 UTC
System Control Status = 0x00440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 4151344 Bytes =4 MB
Load Address: 80000000
Entry Point:802b0000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802b0000) ...
## Giving linux memsize in MB, 64
Starting kernel ...
这个是硬件启动信息。闪存小 TaTaCr 发表于 2014-11-5 13:17
U-Boot 1.1.3 (Mar8 2010 - 16:50:03)
Board: Ralink APSoC DRAM:64 MB
所以也就适合新手练练手，，玩坏了不心疼 TaTaCr 发表于 2014-11-5 13:17
U-Boot 1.1.3 (Mar8 2010 - 16:50:03)
Board: Ralink APSoC DRAM:64 MB
所以也就适合新手练练手，，玩坏了不心疼
页:
[1]