极2 货 uboot 出现这个 是不是没系统了？肿么刷 ？
求大神看代码 这是什么东东 ？
意思是只有uboot ？
还是uboot 和系统不匹配？
如何解决？谢谢了！！
U-Boot 1.1.3 (Oct 22 2014 - 08:51:49)
Board: Ralink APSoC DRAM:64 MB
relocate_code Pointer at: 83fb0000
enable ephy clock...done. rf reg 29 = 5
SSC disabled.
spi_wait_nsec: 29
spi device id: ef 40 18 0 0 (40180000)
find flash: W25Q128BV
raspi_read: from:30000 len:1000
*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7620_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Oct 22 2014Time:08:51:49
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
##### The CPU freq = 580 MHZ ####
estimate memory size =64 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
6: UPGRADE FW/UBOOT/FACTORY via web 192.168.222.6.
___||||||||||||||||||||||||||||||||||||||||||||||||||||||||||___
___|||Anyone can be a geek! Contact RobotCity@foxmail.com.|||___
___||||||||||||||||||||||||||||||||||||||||||||||||||||||||||___
0
3: System Boot system code via Flash.
## Booting image at bc050000 ...
raspi_read: from:50000 len:40
Bad Magic Number,FF000010
送给我吧，不要刷了 hope.. 发表于 2014-12-4 12:21
送给我吧，不要刷了
请教作者 刷好了 如意云;P Free_like_a_bir 发表于 2014-12-4 14:18
请教作者 刷好了 如意云
:@ :victory::victory::victory::victory::victory:
页:
[1]