(IP1001+ar7161+AR9220+AR9223,AR7160)固件+USB
本帖最后由 riyueyou 于 2015-8-7 19:24 编辑固件来自网上搜集，手上只有ar9160和9223暂时支持，5G与2.4G都可用
openwrt
原机固件打包在内
http://yunpan.cn/cdLdyWSW4Tw3F访问密码 6397
挂载u盘和打印机，摄像头暂时没有适合的，一个摄像头可以认官方也支持硬件id但是无法驱动成功！
yBox v1.22.1 (2014-11-18 16:55:27 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.||||.----.||_
| - ||_|-__| |||||| _|| _|
|_______|| __|_____|__|__||________||__||____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Barrier Breaker, r43286)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:~# lsusb
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 004: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
补充内容 (2015-11-9 11:23):
编程器固件
http://yunpan.cn/cHuizf9BTKkrp访问密码 fe60
补充内容 (2017-2-18 18:33):
新链接:https://pan.baidu.com/s/1qXV6vy0 密码:eyb4 riyueyou 发表于 2015-11-9 11:10
贴ttl信息和ifconfig信息
AR7161 CPU 680MHz, DDR 340MHz, AHB 170MHz
+#589:athrs26_phy_speed Unkown speed read!
Ethernet eth0: MAC address 00:03:7f:ff:ff:fe
IP: 192.168.0.6/255.255.255.0, Gateway: 192.168.0.1
Default server: 192.168.0.218
RedBoot(tm) bootstrap and debug environment
Non-certified release, version UNKNOWN - built 12:52:46, Aug 18 2010
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: JA76PF2HX
RAM: 0x80000000-0x84000000, available
FLASH: 0xbf000000 - 0xbfff0000, 256 blocks of 0x00010000 bytes each.
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -l kernel
Image loaded from 0x80060000-0x803719d4
RedBoot> exec -c "console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M"
Now booting linux kernel:
Base address 0x80050000 Entry 0x80060000
Cmdline : console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mem=64M
[ 0.000000] Linux version 3.10.49 (asus@asus-virtual-machine) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43286) ) #1 Tue Nov 18 17:02:13 CST 2014
[ 0.000000] bootconsole enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR7161 rev 2
[ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000]memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0:
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 32512
[ 0.000000] Kernel command line:board=PB42 console=ttyS0,115200 ethaddr=00.03.7f.ff.ff.fe rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00020082
[ 0.000000] Readback ErrCtl register=00020082
[ 0.000000] Memory: 126120k/131072k available (2305k kernel code, 4952k reserved, 612k data, 280k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[ 0.060000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 512
[ 0.070000] NET: Registered protocol family 16
[ 0.070000] MIPS: machine is MASELinK AP2600IFM
[ 0.570000] registering PCI controller with io_map_base unset
[ 2.480000] bio: create slab <bio-0> at 0
[ 2.480000] PCI host bridge to bus 0000:00
[ 2.490000] pci_bus 0000:00: root bus resource
[ 2.490000] pci_bus 0000:00: root bus resource
[ 2.500000] pci_bus 0000:00: No busn resource found for root bus, will use
[ 2.500000] pci 0000:00:11.0: BAR 0: assigned
[ 2.510000] pci 0000:00:11.0: using irq 40 for pin 1
[ 2.510000] Switching to clocksource MIPS
[ 2.520000] NET: Registered protocol family 2
[ 2.520000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 2.520000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 2.530000] TCP: Hash tables configured (established 1024 bind 1024)
[ 2.530000] TCP: reno registered
[ 2.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 2.540000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 2.550000] NET: Registered protocol family 1
[ 2.560000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.570000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.580000] msgmni has been set to 246
[ 2.580000] io scheduler noop registered
[ 2.590000] io scheduler deadline registered (default)
[ 2.590000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 2.620000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 2.630000] console enabled, bootconsole disabled
[ 2.630000] console enabled, bootconsole disabled
[ 2.640000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 2.650000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[ 2.650000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 2.660000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
[ 2.700000] 5 RedBoot partitions found on MTD device spi0.0
[ 2.700000] Creating 5 MTD partitions on "spi0.0":
[ 2.710000] 0x000000000000-0x000000040000 : "RedBoot"
[ 2.710000] 0x000000040000-0x000000150000 : "kernel"
[ 2.720000] 0x000000150000-0x000000fe0000 : "rootfs"
[ 2.720000] mtd: device 2 (rootfs) set to be root filesystem
[ 2.730000] 1 squashfs-split partitions found on MTD device rootfs
[ 2.740000] 0x000000860000-0x000000fe0000 : "rootfs_data"
[ 2.740000] 0x000000fe0000-0x000000fef000 : "FIS directory"
[ 2.750000] 0x000000fef000-0x000000ff0000 : "RedBoot config"
[ 2.760000] libphy: ag71xx_mdio: probed
[ 3.070000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:01
[ 3.080000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 3.080000] TCP: cubic registered
[ 3.090000] NET: Registered protocol family 17
[ 3.090000] 8021q: 802.1Q VLAN Support v1.8
[ 3.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.110000] Freeing unused kernel memory: 280K (8033a000 - 80380000)
procd: Console is alive
procd: - watchdog -
[ 6.530000] usbcore: registered new interface driver usbfs
[ 6.540000] usbcore: registered new interface driver hub
[ 6.540000] usbcore: registered new device driver usb
[ 6.580000] SCSI subsystem initialized
[ 6.590000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.590000] ehci-platform: EHCI generic platform driver
[ 6.600000] ehci-platform ehci-platform: EHCI Host Controller
[ 6.610000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 6.610000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 6.640000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 6.640000] hub 1-0:1.0: USB hub found
[ 6.650000] hub 1-0:1.0: 2 ports detected
[ 6.650000] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.660000] usbcore: registered new interface driver usb-storage
procd: - preinit -
Press the key and hit to enter failsafe mode
Press the , , or key and hit to select the debug level
[ 9.070000] eth0: link up (1000Mbps/Full duplex)
kmod: ran 1 iterations
[ 10.780000] jffs2: notice: (304) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
block: extroot: no root or overlay mount defined
jffs2 is ready
jffs2 is ready
[ 10.880000] jffs2: notice: (301) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
switching to overlay
[ 10.910000] eth0: link down
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 12.990000] NET: Registered protocol family 10
[ 13.000000] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 13.020000] NTFS driver 2.1.30 .
[ 13.040000] Initializing XFRM netlink socket
[ 13.050000] NET: Registered protocol family 15
[ 13.050000] tun: Universal TUN/TAP device driver, 1.6
[ 13.060000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 13.100000] l2tp_core: L2TP core driver, V2.0
[ 13.120000] l2tp_netlink: L2TP netlink interface
[ 13.120000] sit: IPv6 over IPv4 tunneling driver
[ 13.130000] gre: GRE over IPv4 demultiplexor driver
[ 13.150000] ip_gre: GRE over IPv4 tunneling driver
[ 13.250000] ip6_gre: GRE over IPv6 tunneling driver
[ 13.270000] nf_conntrack version 0.5.0 (1975 buckets, 7900 max)
[ 13.290000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.350000] u32 classifier
[ 13.350000] input device check on
[ 13.350000] Actions configured
[ 13.380000] Mirror/redirect action on
[ 13.390000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 13.400000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 13.440000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.500000] nf_conntrack_rtsp v0.6.21 loading
[ 13.570000] nf_nat_rtsp v0.6.21 loading
[ 13.610000] usbcore: registered new interface driver ums-alauda
[ 13.620000] usbcore: registered new interface driver ums-cypress
[ 13.640000] usbcore: registered new interface driver ums-datafab
[ 13.660000] usbcore: registered new interface driver ums-freecom
[ 13.680000] usbcore: registered new interface driver ums-isd200
[ 13.710000] usbcore: registered new interface driver ums-jumpshot
[ 13.730000] usbcore: registered new interface driver ums-karma
[ 13.760000] usbcore: registered new interface driver ums-sddr09
[ 13.760000] usbcore: registered new interface driver ums-sddr55
[ 13.790000] usbcore: registered new interface driver ums-usbat
[ 13.890000] xt_time: kernel timezone is -0000
[ 13.980000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.980000] cfg80211: World regulatory domain updated:
[ 13.990000] cfg80211:DFS Master region: unset
[ 13.990000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.000000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.010000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.020000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.030000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.030000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.040000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.050000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.060000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.140000] PPP generic driver version 2.4.2
[ 14.170000] PPP MPPE Compression module registered
[ 14.170000] NET: Registered protocol family 24
[ 14.200000] PPTP driver version 0.8.5
[ 14.230000] usbcore: registered new interface driver rt73usb
[ 14.260000] usbcore: registered new interface driver rtl8187
[ 14.340000] usbcore: registered new interface driver brcmfmac
[ 14.340000] usbcore: registered new interface driver carl9170
[ 14.370000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 14.390000] usbcore: registered new interface driver rt2500usb
[ 14.420000] usbcore: registered new interface driver rt2800usb
[ 14.470000] usbcore: registered new interface driver ath9k_htc
[ 14.490000] usbcore: registered new interface driver rtl8192cu
[ 14.530000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
[ 16.440000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[ 16.450000] cfg80211: Calling CRDA for country: US
[ 16.470000] cfg80211: Regulatory domain changed to country: US
[ 16.470000] cfg80211:DFS Master region: FCC
[ 16.480000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.490000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 16.490000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 16.500000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 16.510000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 16.520000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 23.830000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.830000] device eth0 entered promiscuous mode
[ 23.840000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 24.160000] eth0: link up (1000Mbps/Full duplex)
[ 24.160000] br-lan: port 1(eth0) entered forwarding state
[ 24.170000] br-lan: port 1(eth0) entered forwarding state
[ 24.170000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.220000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 24.800000] cfg80211: Calling CRDA for country: CN
[ 24.810000] cfg80211: Regulatory domain changed to country: CN
[ 24.810000] cfg80211:DFS Master region: FCC
[ 24.820000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 24.820000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.830000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
[ 24.840000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 24.850000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 24.860000] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 24.870000] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 24.870000] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 26.170000] br-lan: port 1(eth0) entered forwarding state
[ 26.190000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
procd: - init complete -
技术贴不顶不行 谢谢楼主精彩分享xingguo 必须收藏啊！ 330电阻哪我就是短接的识别不了U盘，明天改330电阻试试 10655188 发表于 2015-8-14 23:28
330电阻哪我就是短接的识别不了U盘，明天改330电阻试试
有的有可能是固件问题，试试这个http://yunpan.cn/cdLYRB7A5aD8N访问密码 7375 请问一下楼主，能否发个编程器刷机固件？谢谢！ ztz188 发表于 2015-8-22 23:50
请问一下楼主，能否发个编程器刷机固件？谢谢！
http://pan.baidu.com/s/1gdAm4Wb 10655188 发表于 2015-9-5 21:50
http://pan.baidu.com/s/1gdAm4Wb
谢谢坛友分享！:handshake ztz188 发表于 2015-8-22 23:50
请问一下楼主，能否发个编程器刷机固件？谢谢！
编程器固件自己合就是了！winhex把分区文件合并就行！！ riyueyou 发表于 2015-9-20 09:20
编程器固件自己合就是了！winhex把分区文件合并就行！！
怎么合啊说说吧不会啊 10655188 发表于 2015-9-21 20:53
怎么合啊说说吧不会啊
下载winhex软件安装，新建一个文件，根据你的闪存设置相同容量，然后根据各分区写入相关地址就行！！下午给你合一个！！