斐讯302M，房东网线拨号老是掉线，发日志求助
本帖最后由 神州009 于 2015-12-9 18:54 编辑房东的网线，主路由器不明，dns是10.0.0.1，直接插网线非常稳定，用路由器的PPPOE拨号，房东提供单独帐号密码，每过一会自动掉线，然后一会又自动连接，发个日志，大家帮忙支招啊，感激不尽了。
日志里的第一行No response to 10 echo-requests，echo有10次没有响应，系统判定为掉线，是不是这样的意思啊？
-----------------------------------------------------------------------------------------------------------
Dec9 18:13:21 phicomm daemon.info pppd: No response to 10 echo-requests
Dec9 18:13:21 phicomm daemon.notice pppd: Serial link appears to be disconnected.
Dec9 18:13:21 phicomm daemon.err miniupnpd: Failed to get IP for interface ppp0
Dec9 18:13:21 phicomm daemon.warn miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
Dec9 18:13:21 phicomm daemon.notice pppd: Connection terminated.
Dec9 18:13:21 phicomm daemon.info pppd: Connect time 24161390.8 minutes.
Dec9 18:13:21 phicomm daemon.info pppd: Sent 444431 bytes, received 6074169 bytes.
Dec9 18:13:21 phicomm user.emerg route: route del 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:13:21 phicomm user.emerg route: route add 0.0.0.0 gw 192.168.1.1 metric 10 netmask 0.0.0.0 dev eth2.2
Dec9 18:13:30 phicomm daemon.notice miniupnpd: received signal 15, good-bye
Dec9 18:13:30 phicomm user.emerg route: route add 0.0.0.0 gw 0.0.0.0 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:13:51 phicomm daemon.info pppd: Sent PADT
Dec9 18:13:51 phicomm daemon.info pppd: PPP session is 42760
Dec9 18:13:51 phicomm daemon.info pppd: Using interface ppp0
Dec9 18:13:51 phicomm daemon.notice pppd: Connect: ppp0 <--> eth2.2
Dec9 18:13:51 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:13:51 phicomm daemon.notice pppd: PAP authentication succeeded
Dec9 18:13:51 phicomm daemon.notice pppd: peer from calling number 00:56:4F:37:78:7B authorized
Dec9 18:13:52 phicomm daemon.notice pppd: localIP address 10.0.0.23
Dec9 18:13:52 phicomm daemon.notice pppd: remote IP address 10.0.0.1
Dec9 18:13:52 phicomm daemon.notice pppd: primary DNS address 10.0.0.1
Dec9 18:13:52 phicomm daemon.notice pppd: secondary DNS address 10.0.0.1
Dec9 18:13:52 phicomm user.emerg route: route add 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:13:52 phicomm user.emerg route: route add 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:13:58 phicomm user.warn kernel: HTB: quantum of class 10003 is big. Consider r2q change.
Dec9 18:14:00 phicomm user.info syslog: SNet version started
Dec9 18:14:00 phicomm daemon.notice miniupnpd: HTTP listening on port 5000
Dec9 18:14:00 phicomm daemon.notice miniupnpd: Listening for NAT-PMP traffic on port 5351
Dec9 18:14:21 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:14:51 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:15:21 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:15:51 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:16:21 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:16:51 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:17:21 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:17:51 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:18:22 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:18:52 phicomm daemon.info pppd: No response to 10 echo-requests
Dec9 18:18:52 phicomm daemon.notice pppd: Serial link appears to be disconnected.
Dec9 18:18:52 phicomm daemon.err miniupnpd: m
Dec9 18:18:52 phicomm daemon.err miniupnpd: Failed to get IP for interface ppp0
Dec9 18:18:52 phicomm daemon.warn miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
Dec9 18:18:52 phicomm daemon.notice pppd: Connection terminated.
Dec9 18:18:52 phicomm daemon.info pppd: Connect time 5.1 minutes.
Dec9 18:18:52 phicomm daemon.info pppd: Sent 924192 bytes, received 4963155 bytes.
Dec9 18:18:52 phicomm user.emerg route: route del 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:18:52 phicomm user.emerg route: route add 0.0.0.0 gw 192.168.1.1 metric 10 netmask 0.0.0.0 dev eth2.2
Dec9 18:19:01 phicomm daemon.notice miniupnpd: received signal 15, good-bye
Dec9 18:19:01 phicomm user.emerg route: route add 0.0.0.0 gw 0.0.0.0 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:19:22 phicomm daemon.info pppd: Sent PADT
Dec9 18:19:22 phicomm daemon.info pppd: PPP session is 43784
Dec9 18:19:22 phicomm daemon.info pppd: Using interface ppp0
Dec9 18:19:22 phicomm daemon.notice pppd: Connect: ppp0 <--> eth2.2
Dec9 18:19:22 phicomm daemon.warn pppd: appear to have received our own echo-reply!
Dec9 18:19:22 phicomm daemon.notice pppd: PAP authentication succeeded
Dec9 18:19:22 phicomm daemon.notice pppd: peer from calling number 00:56:4F:37:78:7B authorized
Dec9 18:19:23 phicomm daemon.notice pppd: localIP address 10.0.0.23
Dec9 18:19:23 phicomm daemon.notice pppd: remote IP address 10.0.0.1
Dec9 18:19:23 phicomm daemon.notice pppd: primary DNS address 10.0.0.1
Dec9 18:19:23 phicomm daemon.notice pppd: secondary DNS address 10.0.0.1
Dec9 18:19:23 phicomm user.emerg route: route add 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:19:23 phicomm user.emerg route: route add 0.0.0.0 gw 10.0.0.1 metric 0 netmask 0.0.0.0 dev ppp0
Dec9 18:19:29 phicomm user.warn kernel: HTB: quantum of class 10003 is big. Consider r2q change.
Dec9 18:19:31 phicomm user.info syslog: SNet version started
Dec9 18:19:31 phicomm daemon.notice miniupnpd: HTTP listening on port 5000
Dec9 18:19:31 phicomm daemon.notice miniupnpd: Listening for NAT-PMP traffic on port 5351
求帮忙啊 怎么没有一个人回应呢 房东宽带条件复杂，质量也差，原因就是因为echo多次没有反应，路由器判定为掉线，所以你只需要更改一下参数就可以骗过路由器，从而达到不掉线。
刷潘多拉，然后用winscp连接，打开/etc/ppp/options，把lcp-echo-failure 和lcp-echo-interval 这两行的值都改成0，保存。然后拨号，成功，亲测有效。用潘多拉不能拨号的问题也可以用这个方法解决
页:
[1]