aruba的msr2000升级中mips32.ari文件加载错误求助！请手头有aruba AC的朋友帮帮忙！
aruba的msr2000升级中mips32.ari文件加载错误求助！请手头有aruba AC的朋友帮帮忙！如何 帮忙：
1.找一台可以访问AC的电脑，新建一个内容为空的文件，文件名为mips32.ari
2.使用tftp软件的客户端功能，设置好主机为AC的IP,端口为69，设置本地文件为步骤一建的文件，远程文件填写mips32.ari，然后点击接收，通过AC下载mips32.ari文件，下载是会提示覆盖本地文件，即可。
3.麻烦把mips32.ari文件发了邮箱ajlnm@126.com，先谢谢了！
本帖最后由 爱快北京无线 于 2018-5-21 08:12 编辑
msr2000不能使用mips32.ari,那是给ap68 ap105这些使用的，我从我的7210给你提取的是最新版本的你试验看看吧！
怎付了金币，没有权限下载？
方便直接发文件给我不？ajlnm@126.com,谢谢！ 阿民 发表于 2018-5-21 10:34
方便直接发文件给我不？,谢谢！
赚点论坛积分呀，请理解，天下没有免费午餐，如果连着点积分都舍不得，那我看还是算了吧 本帖最后由 爱快北京无线 于 2018-5-21 13:09 编辑
阿民 发表于 2018-5-21 10:33
怎付了金币，没有权限下载？
这不都提示其中2个压缩包各被下了一次了，msr2000是阿德利亚的产品，不是正规aruba的，他用的 也不是apboot,所以其实你根本无法使用aruba的固件，就算使用最后也会报错的. mips32.ari是aruba的瘦固件，能使用的设备有AP68 AP92/93 AP105 AP115这些而已
本帖最后由 爱快北京无线 于 2018-5-21 15:26 编辑
让管理员给你看看到底啥原因吧，是不是论坛bug了？
给你提供一个网盘下载吧https://pan.baidu.com/s/10r0SjisnRKpPy5E4jA9EmA
爱快北京无线 发表于 2018-5-21 15:24
让管理员给你看看到底啥原因吧，是不是论坛bug了？
给你提供一个网盘下载吧https://pan.baidu.com/s/10r0S ...
谢谢！ 本帖最后由 阿民 于 2018-5-22 08:53 编辑
The system is going down NOW !!
Sending SIGTERM to all processes.
Please stand by while rebooting the system.
Restarting system.
.
APBoot 1.3.6.3 (build xguo)
Built: 2012-10-22 at 16:11:24
Model: AP-175X
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM:128 MB
POST1: passed
Copy:done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID classrev MBAR0 MBAR1 MBAR2 MBAR3
0000168c0029 00002 01 10000000 00000000 00000000 00000000
0100168c0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1
Hit <Enter> to stop autoboot:0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0x9920b449
eth0 up: 1 Gb/s full duplex
Using eth0 device
TFTP from server 10.132.18.240; our IP address is 10.132.18.254
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: T #################################################################
#########################
done
Bytes transferred = 5855576 (595958 hex)
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
Automatic boot of image at addr 0x02000000 ...
ELF file is 32 bit
Loading .text @ 0x80e00000 (5785816 bytes)
Loading .data @ 0x813848e0 (32 bytes)
Clearing .bss @ 0x81384900 (16 bytes)
## Starting application at 0x80e00000 ...
Uncompressing.......................................................
Aruba Networks
ArubaOS Version 8.2.1.0 (build 64044 / label #64044)
Built by p4build@pr-hpn-build07 on 2018-03-16 at 12:04:56 UTC (gcc version 4.3.3)
CPU Rev: aa
71x CPU
Flash variant: default
Cache parity protection disabled
Using 340.000 MHz high precision timer. cycles_per_jiffy=680000
Memory: 120576k/131072k available (1741k kernel code, 10412k reserved, 810k data, 4968k init, 0k highmem)
available.
detected lzma initramfs
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=24664064
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> .........................................................................................................................................................................................................................................................................................................................................................................................
AR7100 GPIOC major 0
wdt: registered with refresh
Enabling Watchdog
Talisker RSSI LED initialization
Creating 1 MTD partitions on "ar7100-nor0":
0x00000000-0x01000000 : "flash"
i2c /dev entries driver
i2c-talisker: using default base 0x18040000
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
Starting Kernel DES KAT ...Completed Kernel DES KAT
Starting Kernel AES KAT ...Completed Kernel AES KAT
Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT
Domain Name: arubanetworks.com
No panic info available
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 512
AG7100: Max segments per packet 4
AG7100: Max tx descriptor count 400
AG7100: Max rx descriptor count 252
AG7100: fifo cfg 3 018001ff
AG7100CHH: Mac address for unit 0
AG7100CHH: d8:c7:c8:2c:64:32
AG7100: cfg1 0xf cfg2 0x7014
VSC8601: Found 0unit 0:0phy_addr: 1id: 02430d91
VSC8601: PHY is ICPlus IP1001 (Gigabit)
VSC8601: unit 0phy_addr 1
AP xml model 48, num_radios 2 (jiffies 11037)
apType 48 hw_opmode 0
radio 0: band 1 ant 1 max_ssid 8
radio 1: band 0 ant 1 max_ssid 8
init_asap_mod: installation:0
firewall cpu: core-0
Starting watchdog process...
Got all network params from APboot env. Skippingag7100_ring_alloc Allocated 4800 at 0x86844000
DHCP
ag7100_ring_alloc Allocated 3024 at 0x86095000
AG7100: cfg1 0xf cfg2 0x7014
VSC8601: Found 0unit 0:0phy_addr: 1id: 02430d91
VSC8601: PHY is ICPlus IP1001 (Gigabit)
VSC8601: unit 0phy_addr 1
VSC8601: unit 0phy_addr 1
AG7100: unit 0: phy not up carrier 1
Writing 4
ADDRCONF(NETDEV_UP): bond0: link is not ready
10.132.18.254 255.255.255.0 10.132.18.1
Running ADP...VSC8601: unit 0phy_addr 1
AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex
AG7100: pll reg 0x18050010: 0x110000AG7100: cfg_1: 0x1ff0000
AG7100: cfg_2: 0x3ff
AG7100: cfg_3: 0x18001ff
AG7100: cfg_4: 0xffff
AG7100: cfg_5: 0xfffef
AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
Done. Master is 192.157.208.178
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_rate_atheros: Aruba Networks Rate Control Algorithm
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_spectrum: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_attach: scn 86350280 sc 863a0000 ah 80580000
wifi0: Base BSSID d8:c7:c8:46:43:28, 8 available BSSID(s)
bond0 address=d8:c7:c8:2c:64:32
br0 address=d8:c7:c8:2c:64:32
wifi0: AP type AP-175AC, radio 0, max_bssids 8
wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000
ath_attach: scn 85e40280 sc 85e60000 ah 85e80000
wifi1: Base BSSID d8:c7:c8:46:43:20, 8 available BSSID(s)
bond0 address=d8:c7:c8:2c:64:32
br0 address=d8:c7:c8:2c:64:32
wifi1: AP type AP-175AC, radio 1, max_bssids 8
wifi1: Atheros 9280: mem=0x10010000, irq=49 hw_base=0xb0010000
ath_ahb: 0.9.4.5 (Atheros/multi-bss)
Starting FIPS KAT ... Completed FIPS KAT
AP rebooted Fri Dec 31 16:02:05 PST 1999; Critical process /aruba/bin/rapper DIED, process marked as RESTART
keep watchdog process alive for talisker (nanny will restart it)...
<<<<< Welcome to the Access Point >>>>>
还真的被你 说中了，看提示好像得授权？ag7100_mod: module license 'unspecified' taints kernel.？
还真的被你 说中了，看提示好像得授权？ag7100_mod: module license 'unspecified' taints kernel.？
页:
[1]
2