csclee 发表于 2019-11-8 13:43

tp 840nv1启动失败，这个错误是什么原因

AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full duplex
AG7240: done cfg2 0x7215 ifctl 0x0 miictrl
Virian MDC CFG Value ==> 4
AG7240: enet unit 1 phy 0 mode 0x4c04
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
ip_nat_pptp version 3.0 loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
DFS min filter rssiThresh = 18
DFS max pulse dur = 131 ticks
wifi0: Atheros 9287: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wlan: mac acl policy registered
dfs_init_radar_filters: Unknown dfs domain 0

TP_Flags:6****


tvro999 发表于 2019-11-9 07:34

重新刷固件
页: [1]
查看完整版本: tp 840nv1启动失败，这个错误是什么原因