r550，web页面升级故障
r550，web升级固件，没有跨版本升级，正常升级，一直卡再正在处理，反复重置也没有作用 切换到火狐浏览器. leiclye 发表于 2025-5-23 17:19切换到火狐浏览器.
换了，也不行，恢复出厂设置，也卡死:L 用SSH升级 ruckus 发表于 2025-5-24 09:05
用SSH升级
没有fw命令，怎么处理:( fw set proto tftp
fw set control R550_fw.bl7
fw update IP地址
reboot
运行TFTP软件，IP地址填这个电脑的，将固件和TFTP文件放一起 ruckus 发表于 2025-5-24 17:52
fw set proto tftp
fw set control R550_fw.bl7
fw update IP地址
The command is either unrecognized or incomplete. To view a list of commands that you can runfrom this context, type '?' or 'help'. ruckus 发表于 2025-5-24 17:52
fw set proto tftp
fw set control R550_fw.bl7
fw update IP地址
ruckus#
exit Ends the CLI session.
help Shows available commands.
quit Ends the CLI session.
history Shows a list of previously run commands.
disable Disables privileged commands.
ping <IP-ADDR/DOMAIN-NAME>
Sends ICMP echo packets to an IP/IPv6 address or domain name.
reboot Reboots the controller.
shutdown Shut down ZoneDirector, to power on ZoneDirector again, press the power
button. When the Status LED is lit steadily, you can then reconnect to
CLI.
set-factory Set factory default.
switch-ap Set factory default.
data-privacy Excutes data-privacy command.
config Configures options and settings.
logo Contains commands that can be executed from within the context.
easyDpl-get-status Get easy-deployment running status.
easyDpl-disable Debug command, please stop easy-deployment by Webpage. This command stops
easy-deployment and disables tr069 function, may cause mechanism chaos when
easy-deployment is after prepareimage status.
debug Manages system debug options.
show Displays system options and settings.
reset Reset system options and settings.
session-timeout <NUMBER>
Sets the CLI session timeout.
ap-mode Go to local AP's CLI from Master's CLI.
只有这几个命令可以用
页:
[1]