使用4965agn 到这了不知道怎么操作了
root@slax:~# ifconfig -aeth1 Link encap:EthernetHWaddr 00:22:15:a4:bf:83
inet addr:192.168.1.158Bcast:192.168.1.255Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICASTMTU:1500Metric:1
RX packets:738 errors:0 dropped:0 overruns:0 frame:0
TX packets:754 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:590969 (577.1 KiB)TX bytes:99385 (97.0 KiB)
Interrupt:18 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1Mask:255.0.0.0
UP LOOPBACK RUNNINGMTU:16436Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
wlan0 Link encap:EthernetHWaddr 00:1f:3b:43:f0:4f
UP BROADCAST NOTRAILERS MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
wmaster0Link encap:UNSPECHWaddr 00-1F-3B-43-F0-4F-00-00-00-00-00-00-00-00-00
-00
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
root@slax:~# airmon-ng start wlan0 6
Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!
PID Name
6398 dhcpcd
6431 dhcpcd
Process with PID 6398 (dhcpcd) is running on interface wlan0
Interface Chipset Driver
wlan0 Unknown iwlagn -
(monitor mode enabled on mon0)
root@slax:~# airodump-ng --ivs -w liu -c 6 mon0
CH6 ][ Elapsed: 16 s ][ 2010-04-21 12:32
CH6 ][ Elapsed: 36 s ][ 2010-04-21 12:32
CH6 ][ Elapsed: 56 s ][ 2010-04-21 12:33
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
BSSID PWR RXQBeacons #Data, #/sCHMB ENCCIPHER AUTH E
08:10:74:50:11:52 -1 0 0 0 0 133-1 <
00:B0:0C:30:A8:90 -1 0 0 0 0 133-1 <
C8:3A:35:32:DB:90 -1 0 0 20 0 133-1 OPN <
00:23:CD:69:DF:1C-58 3 480 8 0 654 . WEPWEP 1
00:25:86:A0:9E:7C-60 0 359 27 0 754 . WEPWEP T
C8:3A:35:32:DD:80-66 0 423 0 0 654 WPA2 CCMP PSKX
00:25:86:99:0C:4E-71 2 410 0 0 654 . WPA2 CCMP PSK5
00:0A:EB:00:23:11-72 3 373 5 0 654 . WEPWEP 1
00:B0:0C:02:CA:6D-7217 322 147 2 654 WPA2 CCMP PSKT
00:27:19:2F:5D:6E-75 0 217 0 0 654 . WPA2 CCMP PSK1
94:0C:6D:65:89:A6-76 2 280 15 0 654 . WPA2 CCMP PSK1
00:21:27:8B:B6:7A-78 0 196 32 0 654 . WEPWEP T
00:21:27:58:7E:AC-73 0 210 0 0 654 . WEPWEP T
C8:3A:35:26:43:20-77 0 140 324 0 654 WPACCMP PSKy
00:24:01:FE:4E:C0-76 8 142 1 0 654eWEPWEP d
08:10:74:51:31:E8-79 5 238 94 5 654 WEPWEP 1
00:1D:0F:7C:11:EE-78 0 199 1 0 654 . WEPWEP 6
00:1D:0F:73:D1:B6-80 0 175 0 0 654 . WEPWEP T
94:0C:6D:69:0F:1E-79 0 42 35 0 654 . WPA2 CCMP PSKT
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
BSSID PWR RXQBeacons #Data, #/sCHMB ENCCIPHER AUTH E
08:10:74:50:11:52 -1 0 0 0 0 133-1 <
00:B0:0C:30:A8:90 -1 0 0 0 0 133-1 <
C8:3A:35:32:DB:90 -1 0 0 20 0 133-1 OPN <
00:23:CD:69:DF:1C-57 3 481 8 0 654 . WEPWEP 1
00:25:86:A0:9E:7C-60 0 359 27 0 754 . WEPWEP T
C8:3A:35:32:DD:80-67 0 424 0 0 654 WPA2 CCMP PSKX
00:25:86:99:0C:4E-70 2 411 0 0 654 . WPA2 CCMP PSK5
00:0A:EB:00:23:11-72 3 373 5 0 654 . WEPWEP 1
00:B0:0C:02:CA:6D-7417 322 148 2 654 WPA2 CCMP PSKT
00:27:19:2F:5D:6E-75 0 217 0 0 654 . WPA2 CCMP PSK1
94:0C:6D:65:89:A6-76 2 280 15 0 654 . WPA2 CCMP PSK1
00:21:27:8B:B6:7A-78 0 196 32 0 654 . WEPWEP T
00:21:27:58:7E:AC-73 0 210 0 0 654 . WEPWEP T
C8:3A:35:26:43:20-77 0 140 324 0 654 WPACCMP PSKy
00:24:01:FE:4E:C0-76 8 142 1 0 654eWEPWEP d
08:10:74:51:31:E8-79 5 238 94 5 654 WEPWEP 1
00:1D:0F:7C:11:EE-78 0 199 1 0 654 . WEPWEP 6
00:1D:0F:73:D1:B6-80 0 175 0 0 654 . WEPWEP T
94:0C:6D:69:0F:1E-78 0 43 35 0 654 . WPA2 CCMP PSKT
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
BSSID PWR RXQBeacons #Data, #/sCHMB ENCCIPHER AUTH ESSID
08:10:74:50:11:52 -1 0 0 0 0 133-1 <lengt
00:B0:0C:30:A8:90 -1 0 0 0 0 133-1 <lengt
C8:3A:35:32:DB:90 -1 0 0 20 0 133-1 OPN <lengt
00:23:CD:69:DF:1C-56 3 482 8 0 654 . WEPWEP 16-527
00:25:86:A0:9E:7C-55 0 361 27 0 754 . WEPWEP TP-LIN
C8:3A:35:32:DD:80-73 0 426 0 0 654 WPA2 CCMP PSKXINGFU
00:25:86:99:0C:4E-71 2 412 0 0 654 . WPA2 CCMP PSK525
00:0A:EB:00:23:11-73 3 375 5 0 654 . WEPWEP 118��S
00:B0:0C:02:CA:6D-7417 323 148 2 654 WPA2 CCMP PSKTENDA
00:27:19:2F:5D:6E-75 0 217 0 0 654 . WPA2 CCMP PSK121
94:0C:6D:65:89:A6-76 0 282 15 0 654 . WPA2 CCMP PSK17#314
00:21:27:8B:B6:7A-76 0 196 34 0 654 . WEPWEP TP-LIN
00:21:27:58:7E:AC-73 0 210 0 0 654 . WEPWEP TP-LIN
C8:3A:35:26:43:20-77 0 140 324 0 654 WPACCMP PSKyhy
00:24:01:FE:4E:C0-76 8 143 1 0 654eWEPWEP dlink
08:10:74:51:31:E8-78 5 238 96 5 654 WEPWEP 127
00:1D:0F:7C:11:EE-78 0 199 1 0 654 . WEPWEP 624
00:1D:0F:73:D1:B6-80 0 175 0 0 654 . WEPWEP TP-LIN
94:0C:6D:69:0F:1E-78 0 43 35 0 654 . WPA2 CCMP PSKTP-LIN
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
BSSID PWR RXQBeacons #Data, #/sCHMB ENCCIPHER AUTH ESSID
00:1D:0F:7C:05:7E -1 0 0 2 0 133-1 WPA <length
00:B0:0C:30:A8:90 -1 0 0 0 0 133-1 <length
C8:3A:35:32:DB:90 -1 0 0 21 0 133-1 OPN <length
08:10:74:50:11:52 -1 0 0 0 0 133-1 <length
00:23:CD:69:DF:1C-68 2 768 12 0 654 . WEPWEP 16-527
00:25:86:A0:9E:7C-69 0 558 50 0 754 . WEPWEP TP-LINK
C8:3A:35:32:DD:80-7452 633 0 0 654 WPA2 CCMP PSKXINGFU1
00:25:86:99:0C:4E-67 2 648 0 0 654 . WPA2 CCMP PSK525
00:0A:EB:00:23:11-72 2 562 7 0 654 . WEPWEP 118��Su
00:B0:0C:02:CA:6D-7228 506 201 2 654 WPA2 CCMP PSKTENDA
94:0C:6D:65:89:A6-76 1 436 17 0 654 . WPA2 CCMP PSK17#314
00:21:27:8B:B6:7A-74 0 285 45 0 654 . WEPWEP TP-LINK
00:1D:0F:7C:11:EE-76 0 331 4 0 654 . WEPWEP 624
08:10:74:51:31:E8-78 0 394 398 0 654 WEPWEP 127
00:21:91:37:D3:18-7535 204 20 0 654eWPATKIP PSKdlink-6
00:B0:0C:36:64:28-79 3 191 69 0 654 WEPWEP TENDA
00:27:19:2F:5D:6E-74 0 322 0 0 654 . WPA2 CCMP PSK121
C8:3A:35:26:43:20-7426 228 426 0 654 WPACCMP PSKyhy
94:0C:6D:69:0F:1E-79 1 71 165 1 654 . WPA2 CCMP PSKTP-LINK
^C
dumping to kismet csv file
root@slax:~# root@slax:~# ifconfig -ac
-bash: root@slax:~#: command not found
root@slax:~# eth1 Link encap:EthernetHWaddr 00:22:15:a4:bf:83
-bash: eth1: command not found
5.255.0ax:~# inet addr:192.168.1.158Bcast:192.168.1.255Mask:255.25
-bash: inet: command not found
ic:1@slax:~# UP BROADCAST NOTRAILERS RUNNING MULTICASTMTU:1500Metr
-bash: UP: command not found
root@slax:~# RX packets:738 errors:0 dropped:0 overruns:0 frame:0
-bash: RX: command not found
root@slax:~# TX packets:754 errors:0 dropped:0 overruns:0 carrier:0
-bash: TX: command not found
root@slax:~# collisions:0 txqueuelen:1000
-bash: collisions:0: command not found
root@slax:~# RX bytes:590969 (577.1 KiB)TX bytes:99385 (97.0 KiB)
-bash: syntax error near unexpected token `('
root@slax:~# Interrupt:18 Base address:0x8000
-bash: Interrupt:18: command not found
root@slax:~#
root@slax:~# lo Link encap:Local Loopback
-bash: lo: command not found
root@slax:~# inet addr:127.0.0.1Mask:255.0.0.0
-bash: inet: command not found
root@slax:~# UP LOOPBACK RUNNINGMTU:16436Metric:1
-bash: UP: command not found
root@slax:~# RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-bash: RX: command not found
root@slax:~# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-bash: TX: command not found
root@slax:~# collisions:0 txqueuelen:0
-bash: collisions:0: command not found
root@slax:~# RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
-bash: syntax error near unexpected token `('
root@slax:~#
root@slax:~# wlan0 Link encap:EthernetHWaddr 00:1f:3b:43:f0:4f
-bash: wlan0: command not found
root@slax:~# UP BROADCAST NOTRAILERS MULTICASTMTU:1500Metric:1
-bash: UP: command not found
root@slax:~# RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-bash: RX: command not found
root@slax:~# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-bash: TX: command not found
root@slax:~# collisions:0 txqueuelen:1000
-bash: collisions:0: command not found
root@slax:~# RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
-bash: syntax error near unexpected token `('
root@slax:~#
0-00-00-00-00wmaster0Link encap:UNSPECHWaddr 00-1F-3B-43-F0-4F-00-00-00-00-0
-bash: wmaster0: command not found
root@slax:~# -00
-bash: -00: command not found
root@slax:~# UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
-bash: UP: command not found
root@slax:~# RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-bash: RX: command not found
root@slax:~# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-bash: TX: command not found
root@slax:~# collisions:0 txqueuelen:1000
-bash: collisions:0: command not found
root@slax:~# RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
-bash: syntax error near unexpected token `('
root@slax:~#
root@slax:~# root@slax:~# airmon-ng start wlan0 6
-bash: root@slax:~#: command not found
root@slax:~#
root@slax:~#
root@slax:~# Found 2 processes that could cause trouble.
-bash: Found: command not found
root@slax:~# If airodump-ng, aireplay-ng or airtun-ng stops working after
-bash: If: command not found
root@slax:~# a short period of time, you may want to kill (some of) them!
-bash: syntax error near unexpected token `('
root@slax:~#
root@slax:~# PID Name
-bash: PID: command not found
root@slax:~# 6398 dhcpcd
-bash: 6398: command not found
root@slax:~# 6431 dhcpcd
-bash: 6431: command not found
root@slax:~# Process with PID 6398 (dhcpcd) is running on interface wlan0
-bash: syntax error near unexpected token `('
root@slax:~#
root@slax:~#
root@slax:~# Interface Chipset Driver
-bash: Interface: command not found
root@slax:~#
root@slax:~# wlan0 Unknown iwlagn -
-bash: wlan0: command not found
root@slax:~# (monitor mode enabled on mon0)
-bash: monitor: command not found
root@slax:~#
root@slax:~# root@slax:~# airodump-ng --ivs -w liu -c 6 mon0
-bash: root@slax:~#: command not found
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#
root@slax:~#CH6 ][ Elapsed: 16 s ][ 2010-04-21 12:32
-bash: CH: command not found
root@slax:~#CH6 ][ Elapsed: 36 s ][ 2010-04-21 12:32
-bash: CH: command not found
root@slax:~#CH6 ][ Elapsed: 56 s ][ 2010-04-21 12:33
-bash: CH: command not found
root@slax:~#CH6 ][ Elapsed: 1 min ][ 2010-04-21 12:33
-bash: CH: command not found
root@slax:~#
IPHER AUTH EBSSID PWR RXQBeacons #Data, #/sCHMB ENCC
-bash: BSSID: command not found
root@slax:~#
<08:10:74:50:11:52 -1 0 0 0 0 133-1
-bash: syntax error near unexpected token `newline'
<00:B0:0C:30:A8:90 -1 0 0 0 0 133-1
-bash: syntax error near unexpected token `newline'
<C8:3A:35:32:DB:90 -1 0 0 20 0 133-1 OPN
-bash: syntax error near unexpected token `newline'
EP 100:23:CD:69:DF:1C-58 3 480 8 0 654 . WEPW
-bash: 00:23:CD:69:DF:1C: command not found
EP T00:25:86:A0:9E:7C-60 0 359 27 0 754 . WEPW
-bash: 00:25:86:A0:9E:7C: command not found
CMP PSKXC8:3A:35:32:DD:80-66 0 423 0 0 654 WPA2 C
-bash: C8:3A:35:32:DD:80: command not found
CMP PSK500:25:86:99:0C:4E-71 2 410 0 0 654 . WPA2 C
-bash: 00:25:86:99:0C:4E: command not found
EP 100:0A:EB:00:23:11-72 3 373 5 0 654 . WEPW
-bash: 00:0A:EB:00:23:11: command not found
CMP PSKT00:B0:0C:02:CA:6D-7217 322 147 2 654 WPA2 C
-bash: 00:B0:0C:02:CA:6D: command not found
CMP PSK100:27:19:2F:5D:6E-75 0 217 0 0 654 . WPA2 C
-bash: 00:27:19:2F:5D:6E: command not found
CMP PSK194:0C:6D:65:89:A6-76 2 280 15 0 654 . WPA2 C
-bash: 94:0C:6D:65:89:A6: command not found
EP T00:21:27:8B:B6:7A-78 0 196 32 0 654 . WEPW
-bash: 00:21:27:8B:B6:7A: command not found
EP T00:21:27:58:7E:AC-73 0 210 0 0 654 . WEPW
-bash: 00:21:27:58:7E:AC: command not found
CMP PSKyC8:3A:35:26:43:20-77 0 140 324 0 654 WPAC
-bash: C8:3A:35:26:43:20: command not found
EP d00:24:01:FE:4E:C0-76 8 142 1 0 654eWEPW
-bash: 00:24:01:FE:4E:C0: command not found
EP 108:10:74:51:31:E8-79 5 238 94 5 654 WEPW
-bash: 08:10:74:51:31:E8: command not found
EP 600:1D:0F:7C:11:EE-78 0 199 1 0 654 . WEPW
-bash: 00:1D:0F:7C:11:EE: command not found
EP T00:1D:0F:73:D1:B6-80 0 175 0 0 654 . WEPW
-bash: 00:1D:0F:73:D1:B6: command not found
CMP PSKT94:0C:6D:69:0F:1E-79 0 42 35 0 654 . WPA2 C
-bash: 94:0C:6D:69:0F:1E: command not found
root@slax:~#
root@slax:~# aireplay-ng -1 0 -a 00:1d:0f:5f:79:7a -h 00:1f:3b:43:f0:4f mon0
12:34:34Waiting for beacon frame (BSSID: 00:1D:0F:5F:79:7A) on channel 6
12:34:41Sending Authentication Request (Open System)
12:34:44Sending Authentication Request (Open System)
12:34:47Sending Authentication Request (Open System)
12:34:50Sending Authentication Request (Open System)
12:34:53Sending Authentication Request (Open System)
12:34:56Sending Authentication Request (Open System)
12:34:59Sending Authentication Request (Open System)
12:35:02Sending Authentication Request (Open System)
12:35:05Sending Authentication Request (Open System)
12:35:08Sending Authentication Request (Open System)
12:35:11Sending Authentication Request (Open System)
12:35:14Sending Authentication Request (Open System)
12:35:17Sending Authentication Request (Open System)
12:35:20Sending Authentication Request (Open System)
12:35:23Sending Authentication Request (Open System)
12:35:26Sending Authentication Request (Open System)
Attack was unsuccessful. Possible reasons:
* Perhaps MAC address filtering is enabled.
* Check that the BSSID (-a option) is correct.
* Try to change the number of packets (-o option).
* The driver/card doesn't support injection.
* This attack sometimes fails against some APs.
* The card is not on the same channel as the AP.
* You're too far from the AP. Get closer, or lower
the transmit rate.
root@slax:~#
root@slax:~# aireplay-ng -9 0 -a 00:1d:0f:5f:79:7a -h 00:1f:3b:43:f0:4f mon0
"aireplay-ng --help" for help.
root@slax:~# aireplay-ng -9
No replay interface specified.
"aireplay-ng --help" for help.
root@slax:~# aireplay-ng mon0 -9
For information, no action required: Using gettimeofday() instead of /dev/rtc
12:39:48Trying broadcast probe requests...
12:39:50No Answer...
12:39:50Found 0 APs http://forum.anywlan.com/thread-63972-1-1.html建议楼主看下本人的这个贴。你要是还不明白可以加我的QQ。希望不要用手动输入的方式~
页:
[1]