禁止发言
超级菜鸟版主
- 注册时间
- 2008-7-6
- 金币
- 976 个
- 威望
- 45 个
- 荣誉
- 24 个
尚未签到
|
OmniPeek适用的无线网卡大全及说明
OmniPeek Product Line Wireless Drivers
OmniPeek 产品所需的无线驱动
Forwireless network analysis, OmniPeek requires the installation ofspecial drivers to capture wireless management, control, and datapackets. In addition to providing support for wireless networkanalysis, these drivers provide complete support for network serviceswhen OmniPeek is not being used.
在进行无线网络分析时，Omnipeek需要安装特殊驱动来捕获管理、控制和数据帧。而且在OmniPeek停止不用时，它们将作为普通驱动支持网络服务的正常运行。
WildPacketssupports wireless network adapters from many different manufacturers,based on the underlying wireless chipset used in the device. Supportedfeatures may vary based on the underlying chipset. Please refer to thefollowing descriptions to find supported wireless adapters and toidentify and download the appropriate drivers for the hardware.
WildPackets支持很多厂家的各种无线网卡适配器,这些无线卡主要基于下面的几种芯片组。当然，芯片组不同，OmniPeek所支持的功能也有所不同。你可以参照以下内容选择合适的无线卡，并下载无线卡所对应的驱动程序。
Compatible Wireless Adapters and Drivers
与OmniPeek兼容的无线卡和驱动
Marvell-based wireless adapters
基于Marvell的无线卡
Marvellhas developed a driver that works with OmniPeek products. This driverprovides full support for all OmniPeek features, including 802.11nsupport as well as WPA/PSK decryption, noise measurement and hardwaretime-stamping. The list of commercially available wireless adapters,along with a link to the required driver, is as follows.
Marvell 开发了一种驱动，可以与OmniPeek配合工作。这种驱动支持OmniPeek的全部功能与特性，包括802.11n、WPA/PSK解密、噪音测量和定时标记。以下是使用这种芯片的商用无线卡列表，以及对应驱动的下载地址： | Model | Band | Driver | Download | | 型号
| 频带
| 驱动
| 下载
| | Buffalo WLI-CB-AG300N | a/b/g/n | Marvell v3.0.18_1 | Download | | Netgear WN511T | b/g/n | Marvell v3.0.18_1 | Download |
Notes说明:
Thislist is expected to grow as more Marvell-based 11n wireless adaptersare introduced.These adapters provide support for complete wirelessnetwork analysis: a/b/g/n.
这个列表上的网卡数目会逐渐增加，因为更多的基于Marvell的11N的网卡会被开发出来。这些网卡提供全系列的无线网络分析：a/b/g/n。
This driver is produced and supported by Marvell. For further information, please refer to Marvell: Consumer Driver Search.
这种驱动是由Marvell开发和支持的，如欲了解详情，请参考Marvell: Consumer Driver Search.
Atheros-based wireless adapters
基于Athero的无线网卡
WildPacketsdevelops its own Atheros wireless drivers to support Atheros-basedwireless network adapters, and we support a broad range of hardware.These drivers are designed for use with Atheros AR5001, AR5002, AR5004,AR5005, AR5006 and AR5008 chipset-based adapters, and support advancedfunctionalities such as 802.11n (AR5008-based adapters only), WPA/PSKdecryption, noise measurement and hardware time-stamping in allOmniPeek products.
基于Atheros的网卡驱动是由Wildpackets自己开发的，并能支持很广范围的硬件。这些驱动适合基于AR5001, AR5002, AR5004, AR5005,AR5006 和AR5008芯片组的无线卡，而且OmniPeek的全部产品支持802.11n(需配合基于AR5008的卡）、WPA/PSK解密、噪音测量和硬件时间标记功能。
WildPackets currently supports three versions ofthe Atheros driver, v3.0.1.12, v4.2.2.9 and v6.0.4.13. The applicationof these drivers is typically as follows.
Wildpackets现在支持基于Atheros三个版本的驱动：v3.0.1.12，v4.2.2.9 和 v6.0.4.13. 驱动的应用对照如下表：
| Atheros Chipset | Driver Version | | Atheros芯片组 | 驱动版本号 | | AR5001 | v3.0.1.12, v4.2.2.9 | | AR5002 | v4.2.2.9 | | AR5004 | v4.2.2.9 | | AR5005 | v4.2.2.9 | | AR5006 | v4.2.2.9 | | AR5008 | v6.0.4.13 |
Someolder Atheros wireless adapters, usually those based on the AtherosAR5001 chipset, are incompatible with driver v4.2.2.9. In these cases,driver v3.0.1.12 should be used.
有些旧的Atheros无线卡，一般基于Atheros AR5001芯片组，与驱动v4.2.2.9不兼容，这样的话，只能使用驱动v3.0.1.12。
Allthree driver versions are included with OmniPeek. Those drivers can befound in the following directory: ProgramFiles\WildPackets\OmniPeek\Driver\atheros. Instructions for installingor uninstalling a driver version are included in the driver readme.
OmniPeek包括全部三个版本的驱动。可以在Program Files\WildPackets\OmniPeek\Driver\atheros文件夹找到这些驱动。驱动安装与写在方法在Readme文件中进行了说明。
|
评分
-
1
查看全部评分
-
|
发表于 2008-9-9 11:45
