HG255D设置PPPOE拨号，求帮助，可提供有偿服务

zjm_feng

qq743204199 发表于 2013-1-26 18:35
孩子，你的是千兆版或者是wan口本来就是坏的，自己到交换机里面设置下虚拟一个端口当Wan吧

这个真不是，我刷dd后，lan1口变wan口，其他口还是口lan口，用电脑识别过了，其他lan端口都可以通过192.168.1.1进去路由器。包含原来真正的wan口

qq743204199

zjm_feng 发表于 2013-1-26 18:40
这个真不是，我刷dd后，lan1口变wan口，其他口还是口lan口，用电脑识别过了，其他lan端口都可以通过192.1 ...

千兆WAN，不用看了

zjm_feng

qq743204199 发表于 2013-1-26 18:42
千兆WAN，不用看了

我打开路由看了好像不是千兆路由的。通过什么还能辨别是不是千兆呢？

zjm_feng

这个路由真头痛

zjm_feng

qq743204199 发表于 2013-1-26 18:42
千兆WAN，不用看了

我的路由内部是这样的

jiafpe

zjm_feng 发表于 2013-1-26 21:18
我的路由内部是这样的

这个不是千兆的，关键在于你的设置肯定出了什么问题

jiafpe

拨号失败，提示代码是什么？

zjm_feng

jiafpe 发表于 2013-1-26 22:45
拨号失败，提示代码是什么？

[    0.000000] Linux version 2.6.32.59 (work@EmbeddedLab-Server) (gcc version 4.3.3 (GCC) ) #95 Mon Oct 29 23:14:47 CST 2012
[    0.000000]
[    0.000000]  The CPU feqenuce set to 384 MHz
[    0.000000] 32M RAM Detected!
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24Kc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 8025a9d0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS1,57600 rootfstype=squashfs,jffs2 root=/dev/mtdblock5 board=HG255D
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00076880
[    0.000000] Readback ErrCtl register=00076880
[    0.000000] Memory: 29808k/32768k available (2068k kernel code, 2960k reserved, 344k data, 140k init, 0k highmem)
[    0.000000] SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:128
[    0.000000] CPU frequency 384.00 MHz
[    0.000000] [debug] (r4k_clockevent_init line: 172)
[    0.000000] [debug] 128 b71b000 (r4k_clockevent_init line: 176)
[    0.000000] c0_compare_int_usable fail, but we don't care
[    0.000000] [debug] (r4k_clockevent_init line: 185)
[    0.000000] [debug] irq: 5 , 800096d4 , (r4k_clockevent_init line: 195)
[    0.000000] 4,[debug] (r4k_clockevent_init line: 217)
[    0.000000] 5,[debug] (r4k_clockevent_init line: 222)
[    0.000000] setup_irq 5
[    0.000000] [debug] (r4k_clockevent_init line: 228)
[    0.000000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.230000] Mount-cache hash table entries: 512
[    0.240000] NET: Registered protocol family 16
[    0.250000] General Ralink Board GPIO Driver. &#169; 2005-2012 lintel<lintel.huang@gmail.com>
[    0.260000] Registering 39 GPIOs
[    0.260000] MIPS: machine is HuaWei HG255D
[    0.270000] Ralink Board GPIO_MODE init:
[    0.270000]         UARTF:SHART
[    0.280000]         I2C:GPIO
[    0.280000]         SPI:GPIO
[    0.280000]         UART_F:GPIO
[    0.290000]         JTAG:GPIO
[    0.290000] GPIO_MODE_REGs: 0x2df
[    0.300000] bio: create slab <bio-0> at 0
[    0.310000] Switching to clocksource MIPS
[    0.320000] NET: Registered protocol family 2
[    0.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.340000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.370000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.380000] TCP reno registered
[    0.390000] NET: Registered protocol family 1
[    0.400000] Load RT2880 Timer Module(Wdg/Soft)
[    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] Registering mini_fo version $Id$
[    0.430000] JFFS2 version 2.2. (NAND) (SUMMARY)  &#169; 2001-2006 Red Hat, Inc.
[    0.440000] msgmni has been set to 58
[    0.450000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.470000] Enable Ralink GDMA Controller Module
[    0.480000] gpiodev: gpio device registered with major 254
[    0.490000] gpiodev: gpio platform device registered with access mask FFFFFFFF
[    0.510000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.520000] serial8250.0: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
[    0.540000] serial8250.0: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
[    0.550000] console [ttyS1] enabled, bootconsole disabled
[    0.590000] brd: module loaded
[    0.600000] ralink physmap platform flash device: 01000000 at 1f000000
[    0.610000] ralink-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[    0.620000]  CFI mfr 0x00000001
[    0.630000]  CFI id  0x00002101
[    0.640000]  Amd/Fujitsu Extended Query Table at 0x0040
[    0.650000]   Amd/Fujitsu Extended Query version 1.3.
[    0.660000] ralink-flash.0: CFI does not contain boot bank location. Assuming top.
[    0.670000] number of CFI chips: 1
[    0.680000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[    0.700000] Creating 7 MTD partitions on "ralink-flash.0":
[    0.710000] 0x000000000000-0x000000040000 : "u-boot"
[    0.720000] 0x000000040000-0x000000060000 : "u-boot-env"
[    0.730000] 0x000000060000-0x000000080000 : "factory"
[    0.740000] 0x000000080000-0x000000160000 : "kernel"
[    0.760000] 0x000000160000-0x000001000000 : "rootfs"
[    0.770000] mtd: partition "rootfs" set to be root filesystem
[    0.780000] mtd: partition "rootfs_data" created automatically, ofs=B00000, len=500000
[    0.800000] 0x000000b00000-0x000001000000 : "rootfs_data"
[    0.810000] 0x000000080000-0x000001000000 : "upgrade"
[    0.820000] 0x000000000000-0x000001000000 : "fullflash"
[    0.840000] Fixed MDIO Bus: probed
[    0.840000] rdm_major = 220
[    0.850000] MAC_ADRH -- : 0x00000000
[    0.860000] MAC_ADRL -- : 0x00000000
[    0.860000] Ralink APSoC Ethernet Driver Initilization. v2.0  256 rx/tx descriptors allocated, mtu = 1500!
[    0.880000] eth2: set mac address
[    0.890000] MAC_ADRH -- : 0x0000000c
[    0.900000] MAC_ADRL -- : 0x4328804e
[    0.900000] PROC INIT OK!
[    0.920000] Registered led device: hg255d:power
[    0.930000] Registered led device: hg255d:internet
[    0.940000] Registered led device: hg255d:wlan
[    0.950000] Registered led device: hg255d:usb
[    0.950000] Registered led device: hg255d:wps
[    0.960000] Registered led device: hg255d:voice
[    0.980000] TCP westwood registered
[    0.980000] NET: Registered protocol family 17
[    0.990000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    1.010000] All bugs added by David S. Miller <davem@redhat.com>
[    1.020000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.040000] Freeing unused kernel memory: 140k freed
[    1.060000] Please be patient, while OpenWrt loads ...
[    3.340000] input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
[    3.450000] Button Hotplug driver version 0.3.1
[    6.710000] mini_fo: using base directory: /
[    6.720000] mini_fo: using storage directory: /tmp/root
[   11.380000]
[   11.380000] phy_tx_ring = 0x01b6d000, tx_ring = 0xa1b6d000
[   11.380000]
[   11.380000] phy_rx_ring0 = 0x01b6e000, rx_ring0 = 0xa1b6e000
[   11.410000] RT305x_ESW: Link Status Changed
[   11.420000] CDMA_CSG_CFG = 81000007
[   11.420000] GDMA1_FWD_CFG = 710000
[   12.230000] device eth2.1 entered promiscuous mode
[   12.240000] device eth2 entered promiscuous mode
[   12.360000] br-lan: port 1(eth2.1) entering forwarding state
[   12.890000] Compat-wireless backport release: compat-wireless-2011-11-29
[   12.900000] Backport based on wireless-testing.git master-2011-12-01
[   13.510000] cfg80211: Calling CRDA to update world regulatory domain
[   15.120000] SCSI subsystem initialized
[   16.660000] usbcore: registered new interface driver usbfs
[   16.670000] usbcore: registered new interface driver hub
[   16.750000] cfg80211: World regulatory domain updated:
[   16.760000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.780000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.790000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.810000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.820000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.840000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.030000] usbcore: registered new device driver usb
[   19.570000] usbcore: registered new interface driver rt2500usb
[   19.700000] usbcore: registered new interface driver rt73usb
[   19.770000] usbcore: registered new interface driver rtl8187
[   19.860000] usbcore: registered new interface driver rt2800usb
[   20.500000] NTFS driver 2.1.29 [Flags: R/O MODULE].
[   21.300000] PPP generic driver version 2.4.2
[   22.190000] tun: Universal TUN/TAP device driver, 1.6
[   22.200000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   22.590000] PPP MPPE Compression module registered
[   22.650000] usbcore: registered new interface driver p54usb
[   23.030000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.510000] NET: Registered protocol family 24
[   23.850000] nf_conntrack version 0.5.0 (467 buckets, 1868 max)
[   23.860000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   23.880000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   23.890000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   25.120000] xt_time: kernel timezone is -0000
[   25.740000] IMQ driver loaded successfully.
[   25.750000]         Hooking IMQ before NAT on PREROUTING.
[   25.760000]         Hooking IMQ after NAT on POSTROUTING.
[   27.350000] rt2860v2_ap: module license 'Proprietary' taints kernel.
[   27.360000] Disabling lock debugging due to kernel taint
[   27.420000]
[   27.420000]
[   27.420000] === pAd = c10a9000, size = 804688 ===
[   27.420000]
[   27.440000] <-- RTMPAllocAdapterBlock, Status=0
[   27.730000] i2c /dev entries driver
[   27.890000] LM Driver register.
[   27.890000]  
[   27.900000] dwc_otg: version 2.72b 20-Aug-2012(Patched by Lintel)
[   27.910000] dwc_otg lm0: dwc_otg_driver_probe(80e88000)
[   27.910000] dwc_otg lm0: start=0x101c0000
[   27.910000] dwc_otg lm0: base=0xb01c0000
[   27.910000] dwc_otg: Core Release: 2.66a
[   27.920000] dwc_otg lm0: dwc_otg_device=0x81be6a00
[   28.130000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled
[   28.140000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled
[   28.150000] dwc_otg: Using DMA mode
[   28.160000] dwc_otg: Device using Buffer DMA mode
[   28.170000] dwc_otg lm0: DWC OTG Controller
[   28.180000] dwc_otg lm0: new USB bus registered, assigned bus number 1
[   28.190000] dwc_otg lm0: irq 18, io mem 0x00000000
[   28.200000] dwc_otg: Init: Port Power? op_state=1
[   28.210000] dwc_otg: Init: Power Port (0)
[   28.220000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   28.230000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   28.250000] usb usb1: Product: DWC OTG Controller
[   28.250000] usb usb1: Manufacturer: Linux 2.6.32.59 dwc_otg_hcd
[   28.270000] usb usb1: SerialNumber: lm0
[   28.270000] usb usb1: configuration #1 chosen from 1 choice
[   28.290000] hub 1-0:1.0: USB hub found
[   28.290000] hub 1-0:1.0: 1 port detected
[   28.880000] usbcore: registered new interface driver cdc_acm
[   28.890000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.200000] usbcore: registered new interface driver snd-usb-audio
[   29.320000] usbcore: registered new interface driver usblp
[   29.410000] usbcore: registered new interface driver usbserial
[   29.420000] USB Serial support registered for generic
[   29.430000] usbcore: registered new interface driver usbserial_generic
[   29.440000] usbserial: USB Serial Driver core
[   29.590000] Initializing USB Mass Storage driver...
[   29.600000] usbcore: registered new interface driver usb-storage
[   29.620000] USB Mass Storage support registered.
[   29.840000] Linux video capture interface: v2.00
[   30.030000] usbcore: registered new interface driver zd1211rw
[   30.390000] USB Serial support registered for GSM modem (1-port)
[   30.410000] usbcore: registered new interface driver option
[   30.420000] option: v0.7.2:USB Driver for GSM modems
[   30.530000] cm109: Keymap for Komunikate KIP1000 phone loaded
[   30.540000] usbcore: registered new interface driver cm109
[   30.550000] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   30.690000] usbcore: registered new interface driver hiddev
[   30.700000] usbcore: registered new interface driver usbhid
[   30.720000] usbhid: v2.6:USB HID core driver
[   30.830000] gspca: main v2.7.0 registered
[   30.870000] usbcore: registered new interface driver sunplus
[   30.880000] sunplus: registered
[   30.920000] usbcore: registered new interface driver zc3xx
[   30.930000] zc3xx: registered
[   31.060000] fuse init (API version 7.13)
[   31.200000] usbcore: registered new interface driver uvcvideo
[   31.210000] USB Video Class driver (v0.1.0)
[   32.260000] RX DESC a1765000  size = 2048
[   32.280000] <-- RTMPAllocTxRxRingMemory, Status=0
[   32.600000] Key1Str is Invalid key length(0) or Type(0)
[   32.610000] Key2Str is Invalid key length(0) or Type(0)
[   32.620000] Key3Str is Invalid key length(0) or Type(0)
[   32.630000] Key4Str is Invalid key length(0) or Type(0)
[   32.690000] 1. Phy Mode = 9
[   32.690000] 2. Phy Mode = 9
[   32.700000] 3. Phy Mode = 9
[   32.710000] MCS Set = ff 00 00 00 00
[   32.720000] Main bssid = 00:0c:43:30:52:88
[   32.720000] <==== rt28xx_init, Status=0
[   32.750000] 0x1300 = 00064380
[   48.210000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   48.250000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   48.260000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[   68.920000] mini_fo: using base directory: /
[   68.930000] mini_fo: using storage directory: /overlay

jiafpe

zjm_feng 发表于 2013-1-26 23:48
[    0.000000] Linux version 2.6.32.59 (work@EmbeddedLab-Server) (gcc version 4.3.3 (GCC) ) #95 Mo ...

你的pppoe 拨号日志没搞出来 你再找找
类似下面的
DreamBox daemon.warn pppd[504]: Timeout waiting for PADO packets
DreamBox daemon.err pppd[504]: Unable to complete PPPoE Discovery

zjm_feng

jiafpe 发表于 2013-1-26 23:55
你的pppoe 拨号日志没搞出来 你再找找
类似下面的
DreamBox daemon.warn pppd[504]: Timeout waiting ...

Jan 26 23:56:58 DreamBox daemon.warn pppd[2121]: Timeout waiting for PADO packets
Jan 26 23:56:58 DreamBox daemon.err pppd[2121]: Unable to complete PPPoE Discovery

zjm_feng

jiafpe 发表于 2013-1-26 23:55
你的pppoe 拨号日志没搞出来 你再找找
类似下面的
DreamBox daemon.warn pppd[504]: Timeout waiting ...

日志都错误

Jan 26 23:56:23 DreamBox user.info kernel: [ 2097.780000] 705 pages reserved
Jan 26 23:56:23 DreamBox user.info kernel: [ 2097.780000] 2357 pages shared
Jan 26 23:56:23 DreamBox user.info kernel: [ 2097.780000] 6052 pages non-shared
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2097.780000] SLUB: Unable to allocate memory on node -1 (gfp=0x20)
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2097.780000]   cache: kmalloc-8192, object size: 8192, buffer size: 8192, default order: 3, min order: 1
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2097.780000]   node 0: slabs: 0, objs: 0, free: 0
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.340000] can't allocate rx 3840 size packet
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.350000] ERROR!!! Failed to allocate RxRing's 1st buffer
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.360000] can't allocate frag rx 3840 size packet
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.370000] <-- RTMPAllocTxRxRingMemory, Status=3
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.380000] ERROR!!! RTMPAllocTxRxMemory failed, Status[=0x00000003]
Jan 26 23:56:23 DreamBox user.info kernel: [ 2098.440000] device ra0 entered promiscuous mode
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.450000] RX DESC a16d1000  size = 2048
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.470000] can't allocate rx 3840 size packet
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.470000] ERROR!!! Failed to allocate RxRing's 1st buffer
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.490000] can't allocate frag rx 3840 size packet
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.500000] <-- RTMPAllocTxRxRingMemory, Status=3
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.500000] ERROR!!! RTMPAllocTxRxMemory failed, Status[=0x00000003]
Jan 26 23:56:23 DreamBox user.warn kernel: [ 2098.520000] !!! rt28xx Initialized fail !!!
Jan 26 23:56:58 DreamBox daemon.warn pppd[2121]: Timeout waiting for PADO packets
Jan 26 23:56:58 DreamBox daemon.err pppd[2121]: Unable to complete PPPoE Discovery

jiafpe

zjm_feng 发表于 2013-1-26 23:58
Jan 26 23:56:58 DreamBox daemon.warn pppd[2121]: Timeout waiting for PADO packets
Jan 26 23:56:58 ...

解决方案有两个
1. 通过vlan修改一个lan口去拨号
2.据胡说某人直接把电话线插到语音拨号口，可以。。。。。没试验过