大师帮忙看下这个路由的内存是16M还是32M

951007244

<Probe SPI #0 >
1.Manufacture ID=0xef
2.Device ID=0x40
3.Capacity ID=0x16
4.Winbond SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =bb08000
01_8198_SFCSR(b8001208) =f8a30000
---RealTek(RTL8196C)at 2012.12.24-19:14+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2011-02-09)
serial console detected.  Disabling virtual terminals.
init started:  BusyBox v1.00-pre8 (2013.01.10-17:24+0000) multi-call binary

BusyBox v1.00-pre8 (2013.01.10-17:24+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
43
8.10.77.32.6b.62.0.0.0.0.0.0.
  6860469
        [updateWscConf:10778:flash.c], pin is different, need update it
wlan_check.sh: do nothing......
killall: multi_ppp: no process killed
killall: igmpproxy: no process killed
killall: udhcpc: no process killed
MIB_HW_TX_POWER_CCK_A=2827272726262626252525242424
MIB_HW_TX_POWER_CCK_A_new=2827272726262626252525242424
MIB_HW_TX_POWER_HT40_1S_A=2928282727262625252424232323
MIB_HW_TX_POWER_HT40_1S_An=2928282727262625252424232323
MIB_HW_TX_POWER_HT20=1f1f1f0f0f0f0f0fffffffffffff
MIB_HW_TX_POWER_HT20n=1f1f1f0f0f0f0f0fffffffffffff
MIB_HW_TX_POWER_DIFF_OFDM=4242434343444444444445454545
MIB_HW_TX_POWER_DIFF_OFDMn=4242434343444444444445454545
SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
SIOCDELRT: No such process
SIOCDELRT: No such process
SIOCDELRT: No such process
udhcp server (v0.9.9-pre) started
open logs file
Unable to open /var/lib/misc/udhcpd.leases for reading
Unable to open /var/lib/misc/udhcpd.leases for reading
if:br0, mask:255.255.255.0, getInAddr()'s return:1
[udhcpd_main:861:dhcpd.c], server_config.auto_time=7200
IEEE 802.1x (WPA) daemon, version 1.8e
SIOCSIFFLAGS: Cannot assign requested address
argc:3 [dhcpc_sh:165:dhcpc.c]
open logs file
options_strings:c:fbH:h:i:np:qr:s:x:v:ld:za:u:
udhcp client (v0.9.9-pre) started
script is:  /usr/share/udhcpc/wlan0-vxd.sh
IEEE 802.11f (IAPP) using interface br0 (v1.7)
SIOCDELRT: No such process
MiniIGD v1.07 (2010.12.23-10:53+0000).
SIOCDELRT: No such process
[set_default_route_sh:294:set_default_gw.c], not impl...
doamin=0
4-1 received
4-2 sent
4-3 received
4-4 sent
4-Way Message 4-4 done
286
313
314
cdrom_wizard start
NETCORE(NW716)CN-V1.2.32180,APR software for NW716 V1.2.32180 Chinese version,2015.01.01 14:51,Copyright(c) by Netcore Technology Co.Ltd. All rights reserved.&192.168.1.1&255.255.255.0&guest&guest&081077326b63
Starting Protocol Module: HTTP Server                      ... OK
329
330
347
# igdmptd: not found
udhcpc_main 2733 0 2
Sending select for 192.168.1.110...
udhcpc_main 2733 1 5
Lease of 192.168.1.110 obtained, lease time 7200
script is:  /usr/share/udhcpc/wlan0-vxd.sh
deleting routers
SIOCDELRT: No such process
adding dns 192.168.1.1
SIOCADDRT: Network is unreachable
******************in dhcpc's wlan0.bound,kill dhcpd**************************
Received a SIGUSR2, in udhcpd[228]
Thu Jan  1 15:01:45 UTC 2015
[update_time] cur:1420124506; orig:1420124505, in read_leases_update_expire
Received a SIGUSR1, in udhcpd[228]
start DNS Relay Daemon
SIOCDELRT: No such process
udhcp server (v0.9.9-pre) started
open logs file
if:br0, mask:255.255.255.0, getInAddr()'s return:1
[udhcpd_main:861:dhcpd.c], server_config.auto_time=7200
SIOCDELRT: No such process
udhcp server (v0.9.9-pre) started
SIOCDELRT: No such process
open logs file
if:br0, mask:255.255.255.0, getInAddr()'s return:1
[udhcpd_main:861:dhcpd.c], server_config.auto_time=7200
Received a SIGUSR2, in udhcpd[488]
Set Firewall...
[update_time] cur:1420124509; orig:1420124508, in read_leases_update_expire
port trigger init, wan is wlan0-vxd.
port trigger stop.
port trigger start.
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
killall: upnpd: no process killed
Chain MINIUPNPD (0 references)
target     prot opt source               destination         
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Warning: wierd character in interface `wlan0-vxd' (No aliases, :, ! or *).
Set Route...
Setup VPN
WARNING[vpn.c:vpn_sh:319]:not support vpn.sh
* Start NTP daemon
port trigger init, wan is wlan0-vxd.
Received a SIGUSR2, in udhcpd[488]
* ntp client success
[update_time] cur:1420124517; orig:1420124511, in read_leases_update_expire
Received a SIGUSR2, in udhcpd[488]
No DHCP ACK with MS_DHCP_STATIC_ROUTE (option 249)
No DHCP ACK with option DHCPC_CLASSLESS_STATIC_ROUTE
No DHCP ACK with option DHCP_STATIC_ROUTE