有没有高手认识这个，能刷机么？

你来你走

有没有高手认识这个，能刷机么？目前知道的信息是 4个千兆口，4个天线  登录ip有个密码，路由背后有个sim插槽可以插3G卡  

你来你走

=== pAd = c05d2000, size = 795312 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc05c0000, csr_addr=0xc05c0000!
rtmp_nv_init:pAd->MC_RowID = 1
E2P_OFFSET = 0x00048000
rdlen [4096]   len[4096]
RX DESC a6d04000  size = 2048
RTMP_TimerListAdd: add timer obj c05681b0!
RTMP_TimerListAdd: add timer obj c04fa3fc!
RTMP_TimerListAdd: add timer obj c04f9ff0!
RTMP_TimerListAdd: add timer obj c04fa3cc!
RTMP_TimerListAdd: add timer obj c04fa774!
RTMP_TimerListAdd: add timer obj c04fa4c4!
RTMP_TimerListAdd: add timer obj c04fa4f4!
RTMP_TimerListAdd: add timer obj c04fa6b4!
RTMP_TimerListAdd: add timer obj c04fa6e4!
RTMP_TimerListAdd: add timer obj c04fd9b4!
RTMP_TimerListAdd: add timer obj c04fd5a8!
RTMP_TimerListAdd: add timer obj c04fd984!
RTMP_TimerListAdd: add timer obj c04fdd2c!
RTMP_TimerListAdd: add timer obj c04fda7c!
RTMP_TimerListAdd: add timer obj c04fdaac!
RTMP_TimerListAdd: add timer obj c04fdc6c!
RTMP_TimerListAdd: add timer obj c04fdc9c!
RTMP_TimerListAdd: add timer obj c0500f6c!
RTMP_TimerListAdd: add timer obj c0500b60!
RTMP_TimerListAdd: add timer obj c0500f3c!
RTMP_TimerListAdd: add timer obj c05012e4!
RTMP_TimerListAdd: add timer obj c0501034!
RTMP_TimerListAdd: add timer obj c0501064!
RTMP_TimerListAdd: add timer obj c0501224!
RTMP_TimerListAdd: add timer obj c0501254!
RTMP_TimerListAdd: add timer obj c0504524!
RTMP_TimerListAdd: add timer obj c0504118!
RTMP_TimerListAdd: add timer obj c05044f4!
RTMP_TimerListAdd: add timer obj c050489c!
RTMP_TimerListAdd: add timer obj c05045ec!
RTMP_TimerListAdd: add timer obj c050461c!
RTMP_TimerListAdd: add timer obj c05047dc!
RTMP_TimerListAdd: add timer obj c050480c!
RTMP_TimerListAdd: add timer obj c0507adc!
RTMP_TimerListAdd: add timer obj c05076d0!
RTMP_TimerListAdd: add timer obj c0507aac!
RTMP_TimerListAdd: add timer obj c0507e54!
RTMP_TimerListAdd: add timer obj c0507ba4!
RTMP_TimerListAdd: add timer obj c0507bd4!
RTMP_TimerListAdd: add timer obj c0507d94!
RTMP_TimerListAdd: add timer obj c0507dc4!
RTMP_TimerListAdd: add timer obj c050b094!
RTMP_TimerListAdd: add timer obj c050ac88!
RTMP_TimerListAdd: add timer obj c050b064!
RTMP_TimerListAdd: add timer obj c050b40c!
RTMP_TimerListAdd: add timer obj c050b15c!
RTMP_TimerListAdd: add timer obj c050b18c!
RTMP_TimerListAdd: add timer obj c050b34c!
RTMP_TimerListAdd: add timer obj c050b37c!
RTMP_TimerListAdd: add timer obj c050e64c!
RTMP_TimerListAdd: add timer obj c050e240!
RTMP_TimerListAdd: add timer obj c050e61c!
RTMP_TimerListAdd: add timer obj c050e9c4!
RTMP_TimerListAdd: add timer obj c050e714!
RTMP_TimerListAdd: add timer obj c050e744!
RTMP_TimerListAdd: add timer obj c050e904!
RTMP_TimerListAdd: add timer obj c050e934!
RTMP_TimerListAdd: add timer obj c0511c04!
RTMP_TimerListAdd: add timer obj c05117f8!
RTMP_TimerListAdd: add timer obj c0511bd4!
RTMP_TimerListAdd: add timer obj c0511f7c!
RTMP_TimerListAdd: add timer obj c0511ccc!
RTMP_TimerListAdd: add timer obj c0511cfc!
RTMP_TimerListAdd: add timer obj c0511ebc!
RTMP_TimerListAdd: add timer obj c0511eec!
RTMP_TimerListAdd: add timer obj c05151bc!
RTMP_TimerListAdd: add timer obj c0514db0!
RTMP_TimerListAdd: add timer obj c051518c!
RTMP_TimerListAdd: add timer obj c0515534!
RTMP_TimerListAdd: add timer obj c0515284!
RTMP_TimerListAdd: add timer obj c05152b4!
RTMP_TimerListAdd: add timer obj c0515474!
RTMP_TimerListAdd: add timer obj c05154a4!
RTMP_TimerListAdd: add timer obj c0518774!
RTMP_TimerListAdd: add timer obj c0518368!
RTMP_TimerListAdd: add timer obj c0518744!
RTMP_TimerListAdd: add timer obj c0518aec!
RTMP_TimerListAdd: add timer obj c051883c!
RTMP_TimerListAdd: add timer obj c051886c!
RTMP_TimerListAdd: add timer obj c0518a2c!
RTMP_TimerListAdd: add timer obj c0518a5c!
RTMP_TimerListAdd: add timer obj c051bd2c!
RTMP_TimerListAdd: add timer obj c051b920!
RTMP_TimerListAdd: add timer obj c051bcfc!
RTMP_TimerListAdd: add timer obj c051c0a4!
RTMP_TimerListAdd: add timer obj c051bdf4!
RTMP_TimerListAdd: add timer obj c051be24!
RTMP_TimerListAdd: add timer obj c051bfe4!
RTMP_TimerListAdd: add timer obj c051c014!
RTMP_TimerListAdd: add timer obj c051f2e4!
RTMP_TimerListAdd: add timer obj c051eed8!
RTMP_TimerListAdd: add timer obj c051f2b4!
RTMP_TimerListAdd: add timer obj c051f65c!
RTMP_TimerListAdd: add timer obj c051f3ac!
RTMP_TimerListAdd: add timer obj c051f3dc!
RTMP_TimerListAdd: add timer obj c051f59c!
RTMP_TimerListAdd: add timer obj c051f5cc!
RTMP_TimerListAdd: add timer obj c052289c!
RTMP_TimerListAdd: add timer obj c0522490!
RTMP_TimerListAdd: add timer obj c052286c!
RTMP_TimerListAdd: add timer obj c0522c14!
RTMP_TimerListAdd: add timer obj c0522964!
RTMP_TimerListAdd: add timer obj c0522994!
RTMP_TimerListAdd: add timer obj c0522b54!
RTMP_TimerListAdd: add timer obj c0522b84!
RTMP_TimerListAdd: add timer obj c0525e54!
RTMP_TimerListAdd: add timer obj c0525a48!
RTMP_TimerListAdd: add timer obj c0525e24!
RTMP_TimerListAdd: add timer obj c05261cc!
RTMP_TimerListAdd: add timer obj c0525f1c!
RTMP_TimerListAdd: add timer obj c0525f4c!
RTMP_TimerListAdd: add timer obj c052610c!
RTMP_TimerListAdd: add timer obj c052613c!
RTMP_TimerListAdd: add timer obj c052940c!
RTMP_TimerListAdd: add timer obj c0529000!
RTMP_TimerListAdd: add timer obj c05293dc!
RTMP_TimerListAdd: add timer obj c0529784!
RTMP_TimerListAdd: add timer obj c05294d4!
RTMP_TimerListAdd: add timer obj c0529504!
RTMP_TimerListAdd: add timer obj c05296c4!
RTMP_TimerListAdd: add timer obj c05296f4!
RTMP_TimerListAdd: add timer obj c052c9c4!
RTMP_TimerListAdd: add timer obj c052c5b8!
RTMP_TimerListAdd: add timer obj c052c994!
RTMP_TimerListAdd: add timer obj c052cd3c!
RTMP_TimerListAdd: add timer obj c052ca8c!
RTMP_TimerListAdd: add timer obj c052cabc!
RTMP_TimerListAdd: add timer obj c052cc7c!
RTMP_TimerListAdd: add timer obj c052ccac!
RTMP_TimerListAdd: add timer obj c053eb1c!
RTMP_TimerListAdd: add timer obj c053ec38!
RTMP_TimerListAdd: add timer obj c053eb48!
RTMP_TimerListAdd: add timer obj c052d300!
RTMP_TimerListAdd: add timer obj c04f7798!
RTMP_TimerListAdd: add timer obj c04fad50!
RTMP_TimerListAdd: add timer obj c04fe308!
RTMP_TimerListAdd: add timer obj c05018c0!
RTMP_TimerListAdd: add timer obj c0504e78!
RTMP_TimerListAdd: add timer obj c0508430!
RTMP_TimerListAdd: add timer obj c050b9e8!
RTMP_TimerListAdd: add timer obj c050efa0!
RTMP_TimerListAdd: add timer obj c0512558!
RTMP_TimerListAdd: add timer obj c0515b10!
RTMP_TimerListAdd: add timer obj c05190c8!
RTMP_TimerListAdd: add timer obj c051c680!
RTMP_TimerListAdd: add timer obj c051fc38!
RTMP_TimerListAdd: add timer obj c05231f0!
RTMP_TimerListAdd: add timer obj c05267a8!
RTMP_TimerListAdd: add timer obj c0529d60!
RTMP_TimerListAdd: add timer obj c052cfd0!
BBP_R254 = 80
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
ERROR!!! Channel DAC not found
1. Phy Mode = 8
2. Phy Mode = 8
Power = 202
Power2 = 202
Power = 202
Power2 = 202
Power = 202
Power2 = 202
Power = 202
Power2 = 101
Power = 202
Power2 = 101
Power = 202
Power2 = 101
3. Phy Mode = 8
AntCfgInit: primary/secondary ant 0/1
bAutoTxAgcG = 0
RTMPSetPhyMode: channel is out of range, use first channel=0
MCS Set = ff ff 00 00 01
Wait RF calibration done BBP_R0 value = 0x82
Wait RF calibration done BBP_R0 value = 0x02
Retry = 2, BBP R57 = 0x07, CalRF57_PassBand = 7
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 0, BBP_R57=0xfffffffe,                                    tx_agc_fc = 0x00, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x09
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 1, BBP_R57=0xfffffffd,                                    tx_agc_fc = 0x01, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0a
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 2, BBP_R57=0xfffffffc,                                    tx_agc_fc = 0x02, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0b
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 3, BBP_R57=0xfffffffc,                                    tx_agc_fc = 0x03, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0b
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 4, BBP_R57=0xfffffffb,                                    tx_agc_fc = 0x04, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0c
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 5, BBP_R57=0xfffffffb,                                    tx_agc_fc = 0x05, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0c
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 6, BBP_R57=0xfffffffa,                                    tx_agc_fc = 0x06, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0d
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 7, BBP_R57=0xfffffffa,                                    tx_agc_fc = 0x07, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0d
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 8, BBP_R57=0xfffffff8,                                    tx_agc_fc = 0x08, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x0f
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 9, BBP_R57=0xfffffff7,                                    tx_agc_fc = 0x09, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x10
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 10, BBP_R57=0xfffffff7,                                   tx_agc_fc = 0x0a, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x10
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 11, BBP_R57=0xfffffff6,                                   tx_agc_fc = 0x0b, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x11
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 12, BBP_R57=0xfffffff5,                                   tx_agc_fc = 0x0c, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x12
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 13, BBP_R57=0xfffffff5,                                   tx_agc_fc = 0x0d, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x12
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 14, BBP_R57=0xfffffff3,                                   tx_agc_fc = 0x0e, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x14
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 15, BBP_R57=0xfffffff3,                                   tx_agc_fc = 0x0f, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x14
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 16, BBP_R57=0xfffffff2,                                   tx_agc_fc = 0x10, CalRF57_PassBand = 0x07,                                      FilterTarget = 0x14, (CalRF57_PassBand - CalRF57_StopBand) = 0x15
Wait RF calibration done BBP_R0 value = 0x82
Wait RF calibration done BBP_R0 value = 0x02
Retry = 2, BBP R57 = 0x06, CalRF57_PassBand = 6
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 0, BBP_R57=0xfffffffa,                                    tx_agc_fc = 0x00, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x0c
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 1, BBP_R57=0xfffffff9,                                    tx_agc_fc = 0x01, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x0d
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 2, BBP_R57=0xfffffff7,                                    tx_agc_fc = 0x02, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x0f
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 3, BBP_R57=0xfffffff7,                                    tx_agc_fc = 0x03, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x0f
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 4, BBP_R57=0xfffffff5,                                    tx_agc_fc = 0x04, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x11
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 5, BBP_R57=0xfffffff5,                                    tx_agc_fc = 0x05, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x11
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 6, BBP_R57=0xfffffff4,                                    tx_agc_fc = 0x06, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x12
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 7, BBP_R57=0xfffffff3,                                    tx_agc_fc = 0x07, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x13
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 8, BBP_R57=0xfffffff2,                                    tx_agc_fc = 0x08, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x14
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 9, BBP_R57=0xfffffff1,                                    tx_agc_fc = 0x09, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x15
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 10, BBP_R57=0xfffffff1,                                   tx_agc_fc = 0x0a, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x15
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 11, BBP_R57=0xfffffff0,                                   tx_agc_fc = 0x0b, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x16
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 12, BBP_R57=0xffffffef,                                   tx_agc_fc = 0x0c, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x17
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 13, BBP_R57=0xffffffee,                                   tx_agc_fc = 0x0d, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x18
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 14, BBP_R57=0xffffffec,                                   tx_agc_fc = 0x0e, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x1a
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 15, BBP_R57=0xffffffec,                                   tx_agc_fc = 0x0f, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x1a
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 16, BBP_R57=0xffffffec,                                   tx_agc_fc = 0x10, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x1a
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 17, BBP_R57=0xffffffeb,                                   tx_agc_fc = 0x11, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x1b
Wait RF calibration done - BPP_R0 value = 0x82
Wait RF calibration done - BPP_R0 value = 0x02
RT55x2ATEFilterCalibration: loopcnt = 18, BBP_R57=0xffffffea,                                   tx_agc_fc = 0x12, CalRF57_PassBand = 0x06,                                      FilterTarget = 0x1b, (CalRF57_PassBand - CalRF57_StopBand) = 0x1c
RT55x2ATEFilterCalibration CaliBW20RfR24 = 0xf, CaliBW40RfR24 = 0x11
SYNC - BBP R4 to 20MHz.l
RTMP_TimerListAdd: add timer obj c0536650!
BssidNum=4
2-BssidNum=4
eid_rule=6774
2-BssidNum=4
eid_rule=6774
2-BssidNum=4
eid_rule=6774
2-BssidNum=4
eid_rule=6774
The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
Main bssid = ac:f1:df:d8:71:5f
<==== rt28xx_init, Status=0
0x1300 = 00064380
The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
device ra0 entered promiscuous mode
device ra1 entered promiscuous mode
device ra2 entered promiscuous mode
device ra3 entered promiscuous mode
Ralink DOT1X daemon, version = '2.4.0.0'
prefix_name = 'ra, argv[1] = (null)'
==RX DESC a6cf0000  size = 2048
= rtdox1 002 link suRTMP_TimerListAdd: add timer obj c06481b0!
RTMP_TimerListAdd: add timer obj c05da3fc!
RTMP_TimerListAdd: add timer obj c05d9ff0!
RTMP_TimerListAdd: add timer obj c05da3cc!
RTMP_TimerListAdd: add timer obj c05da774!
RTMP_TimerListAdd: add timer obj c05da4c4!
RTMP_TimerListAdd: add timer obj c05da4f4!
RTMP_TimerListAdd: add timer obj c05da6b4!
RTMP_TimerListAdd: add timer obj c05da6e4!
RTMP_TimerListAdd: add timer obj c05dd9b4!
RTMP_TimerListAdd: add timer obj c05dd5a8!
RTMP_TimerListAdd: add timer obj c05dd984!
RTMP_TimerListAdd: add timer obj c05ddd2c!
RTMP_TimerListAdd: add timer obj c05dda7c!
RTMP_TimerListAdd: add timer obj c05ddaac!
RTMP_TimerListAdd: add timer obj c05ddc6c!
RTMP_TimerListAdd: add timer obj c05ddc9c!
RTMP_TimerListAdd: add timer obj c05e0f6c!
RTMP_TimerListAdd: add timer obj c05e0b60!
RTMP_TimerListAdd: add timer obj c05e0f3c!
RTMP_TimerListAdd: add timer obj c05e12e4!
RTMP_TimerListAdd: add timer obj c05e1034!
RTMP_TimerListAdd: add timer obj c05e1064!
RTMP_TimerListAdd: add timer obj c05e1224!
RTMP_TimerListAdd: add timer obj c05e1254!
RTMP_TimerListAdd: add timer obj c05e4524!
RTMP_TimerListAdd: add timer obj c05e4118!
RTMP_TimerListAdd: add timer obj c05e44f4!
RTMP_TimerListAdd: add timer obj c05e489c!
RTMP_TimerListAdd: add timer obj c05e45ec!
RTMP_TimerListAdd: add timer obj c05e461c!
RTMP_TimerListAdd: add timer obj c05e47dc!
RTMP_TimerListAdd: add timer obj c05e480c!
RTMP_TimerListAdd: add timer obj c05e7adc!
RTMP_TimerListAdd: add timer obj c05e76d0!
RTMP_TimerListAdd: add timer obj c05e7aac!
RTMP_TimerListAdd: add timer obj c05e7e54!
RTMP_TimerListAdd: add timer obj c05e7ba4!
RTMP_TimerListAdd: add timer obj c05e7bd4!
RTMP_TimerListAdd: add timer obj c05e7d94!
RTMP_TimerListAdd: add timer obj c05e7dc4!
RTMP_TimerListAdd: add timer obj c05eb094!
RTMP_TimerListAdd: add timer obj c05eac88!
RTMP_TimerListAdd: add timer obj c05eb064!
RTMP_TimerListAdd: add timer obj c05eb40c!
RTMP_TimerListAdd: add timer obj c05eb15c!
RTMP_TimerListAdd: add timer obj c05eb18c!
RTMP_TimerListAdd: add timer obj c05eb34c!
RTMP_TimerListAdd: add timer obj c05eb37c!
RTMP_TimerListAdd: add timer obj c05ee64c!
RTMP_TimerListAdd: add timer obj c05ee240!
RTMP_TimerListAdd: add timer obj c05ee61c!
RTMP_TimerListAdd: add timer obj c05ee9c4!
RTMP_TimerListAdd: add timer obj c05ee714!
RTMP_TimerListAdd: add timer obj c05ee744!
RTMP_TimerListAdd: add timer obj c05ee904!
RTMP_TimerListAdd: add timer obj c05ee934!
RTMP_TimerListAdd: add timer obj c05f1c04!
RTMP_TimerListAdd: add timer obj c05f17f8!
RTMP_TimerListAdd: add timer obj c05f1bd4!
RTMP_TimerListAdd: add timer obj c05f1f7c!
RTMP_TimerListAdd: add timer obj c05f1ccc!
RTMP_TimerListAdd: add timer obj c05f1cfc!
RTMP_TimerListAdd: add timer obj c05f1ebc!
RTMP_TimerListAdd: add timer obj c05f1eec!
RTMP_TimerListAdd: add timer obj c061eb1c!
RTMP_TimerListAdd: add timer obj c061ec38!
RTMP_TimerListAdd: add timer obj c061eb48!
RTMP_TimerListAdd: add timer obj c060d300!
ccesful: SucRTMP_TimerListAdd: add timer obj c05d7798!
RTMP_TimerListAdd: add timer obj c05dad50!
RTMP_TimerListAdd: add timer obj c05de308!
RTMP_TimerListAdd: add timer obj c05e18c0!
RTMP_TimerListAdd: add timer obj c05e4e78!
RTMP_TimerListAdd: add timer obj c05e8430!
RTMP_TimerListAdd: add timer obj c05eb9e8!
RTMP_TimerListAdd: add timer obj c05eefa0!
RTMP_TimerListAdd: add timer obj c060cfd0!
cess

你来你走

没有高手知道？~~！！！

hnwlmm

顶上去，虽然我也不懂

nnsat

应该没有相应的第三方固件，本来采用RT6856方案的就少，雷凌+螃蟹的更少
用原版固件吧

tiantan

这螃蟹好大只啊   不用刷了 原固件已经够稳定了

WXYH2010

这螃蟹好大只啊   不用刷了 原固件已经够稳定了

你来你走

WXYH2010 发表于 2018-11-13 08:03
这螃蟹好大只啊   不用刷了 原固件已经够稳定了

原来固件有登录密码，恢复后也是有密码，原用户名是Admin

你来你走

WXYH2010 发表于 2018-11-13 08:03
这螃蟹好大只啊   不用刷了 原固件已经够稳定了

原来固件有登录密码，恢复后也是有密码，原用户名是Admin

你来你走

nnsat 发表于 2018-11-12 19:07
应该没有相应的第三方固件，本来采用RT6856方案的就少，雷凌+螃蟹的更少
用原版固件吧

原来固件有登录密码，恢复后也是有密码，原用户名是Admin

nnsat

TTL应该可以弄出密码

你来你走

我去试试去

你来你走

BDG77ADL_0T1 Jboot S749
               
BDG77ADL_0T1 Jboot S749
flash manufacture id: c2, device id 20 19
SPI FLASH: MX25l25635E 32M
.
auto start from FW1 and UI1
...................
Starting kernel @80000000...
Linux version 2.6.36-svn291 (root@localhost.localdomain) (gcc version 3.4.2) #15 Fri Mar 6 14:52:05 CST 2015
ISPRAM0: PA=002c0000,Size=00008000,enabled
Ralink RT63165 SOC prom init
CPU revision is: 00019555 (MIPS 34Kc)
Determined physical RAM map:
memory: 07fe0000 @ 00020000 (usable)
arch_mem_init check 0xBFBF0114: fffffffd
Wasting 1024 bytes for tracking 32 unused pages
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000020 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000020 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32480
Kernel command line:  es=1 console=ttyS0,57600n8 root=/dev/mtdblock3
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=000132c0
Readback ErrCtl register=000132c0
Memory: 125812k/130944k available (2848k kernel code, 5132k reserved, 889k data, 192k init, 0k highmem)
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
CPU frequency 699.00 MHz
console [ttyS0] enabled
Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
start PCIe register access

*************** RT6855A PCIe RC mode *************
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x2000ffff] (PCI address [0x20000000-0x2000ffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x2010ffff]
pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x2010ffff] (PCI address [0x20100000-0x2010ffff]
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
** bus= 0, slot=0x0
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
** bus= 0, slot=0x1
BAR0 at slot 1 = 0
bus=0x0, slot = 0x1
res[0]->start = 0
res[0]->end = 0
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
** bus= 1, slot=0x0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 2000ffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
** bus= 2, slot=0x1
bus=0x2, slot = 0x1
res[0]->start = 20100000
res[0]->end = 2010ffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RT3xxx EHCI/OHCI init.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 245
io scheduler noop registered (default)
arch_mem_init check 0xBFBF0114: fffffffd
Ralink gpio driver initialized
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
brd: module loaded
loop: module loaded
Generic platform RAM MTD, (c) 2004 Simtec Electronics
flash manufacture id: c2, device id 20 19
MX25L25635E(c2 20190004) (32768 Kbytes)
mtd .name = raspi, .size = 0x02000000 (0M) .erasesize = 0x00000020 (0K) .numeraseregions = 4096
Creating 12 MTD partitions on "raspi":
0x000000000000-0x000002000000 : "Whole"
0x000000000000-0x000000020000 : "Bootloader"
0x000000020000-0x000000190000 : "Kernel"
0x000000190010-0x000000ee0010 : "RootFS"
mtd: partition "RootFS" doesn't start on an erase block boundary -- force read-only
0x000000ee0010-0x000000fc0010 : "UI"
mtd: partition "UI" doesn't start on an erase block boundary -- force read-only
0x000000ff0000-0x000001160000 : "Kernel2"
0x000001160010-0x000001eb0010 : "RootFS2"
mtd: partition "RootFS2" doesn't start on an erase block boundary -- force read-only
0x000001eb0010-0x000001f90010 : "UI2"
mtd: partition "UI2" doesn't start on an erase block boundary -- force read-only
0x000001fc0000-0x000001fd0000 : "Config"
0x000001fd0000-0x000001fe0000 : "Config2"
0x000001fe0000-0x000001ff0000 : "ODM"
0x000001ff0000-0x000002000000 : "ODM2"
rdm_major = 253
MAC_ADRH -- : 0x0000000c
SMACCR1 -- : 0x0000000c
MAC_ADRL -- : 0x432880e1
SMACCR0 -- : 0x432880e1
Ralink APSoC Ethernet Driver Initilization. v2.1  256 rx/tx descriptors allocated, mtu = 1500!
MAC_ADRH -- : 0x0000000c
SMACCR1 -- : 0x0000000c
MAC_ADRL -- : 0x432880dd
SMACCR0 -- : 0x432880dd
PROC INIT OK!
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1965 buckets, 7860 max)
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
gre: can't add protocol
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
L2TP debugfs support
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 192k freed
Algorithmics/MIPS FPU Emulator v1.5
Inter-|   Receive              
phy_tx_ring = 0x07065000, tx_ring = 0xa7065000

phy_rx_ring0 = 0x07066000, rx_ring0 = 0xa7066000
MAC_ADRH -- : 0x0000000c
SMACCR1 -- : 0x0000000c
MAC_ADRL -- : 0x432880dd
SMACCR0 -- : 0x432880dd
ESW: Link Status Changed - Port5 Link UP
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = C0710000
                                  |  Transmit
face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
tunl0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  gre0:       0       0    0    0    0     0          0         0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
       0       0    0    0    0     0       0          0
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x1fbb0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
crypto_k: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Adapter_Interrupts_Init: Successfully hooked IRQ 29

Adapter_Interrupts_Init: call back registeredAdapter_EIP93_Init: CmdRing_Handle=87121ffc
Adapter_EIP93_Init: ResRing_Handle=87121ff8
Adapter: Successfully initialized EIP93v2 in ARM mode

[EIP93_ARM_Level0_WriteDescriptor]
ControlWord:0x00000041
0-byte Src packet from 0x(null):

Dst packet Addr:0x00000000

128-byte SA Content from 0xa7129000:
0x00001307      0x02000000      0xe0fc631d      0xcbb9fb9a      0x869285cb
0xcbb9fb9a      0x00000000      0x00000000      0x00000000      0x00000000
0x758bac03      0xf20ab39e      0xa569f104      0x95dfaea6      0x00000000
0x00000000      0x00000000      0x00000000      0x00000000      0x00000000
0x00000000      0x00000000      0x00000000      0x00000000      0x00000000
0x00000000      0x00000000      0x00000000      0x00000000      0x00000000
0x00000000      0x00000000
56-byte SAState Content from 0xa0000000:
0x08000fcc      0x00000000      0x00000000      0x00000000      0x00000000
0x00000000      0x00000000      0x00000000      0x41606000      0x10000002
0x000000c0      0xaf900048      0x8fa80098      0x31080010
SAARC4 Content from 0xa0000000:


PE_userID:0x00000000

PE_length:0x00400000

[EIP93_WriteCB], CD_BASE:0xa712e000 (B4 kcik PE):
CD_Control:0x00000041
CD_SrcPktAddr:0x00000000
CD_DstPktAddr:0x00000000
CD_SADataAddr:0x07129000
CD_SAStateAddr:0x00000000
CD_SAStateAddr:0x00000000
CD_UserIdAddr:0x00000000
CD_Length:0x00400000

PEC_Init: PRNG is initialized
== IPSEC Crypto Engine Driver : Mar  6 2015 14:49:13 ==
modprobe: module xt_time not found
modprobe: failed to load module xt_time
flash_open: flash_fd=3
mount_ui_check = 1
=============================================
check 0x00000007 rdcsman
0x00000007 rdcsman
=============================================
=============================================
Mount mtdblock4 for UI1.
Mount D Section.
mount: /dev/mtdblock4 is write-protected, mounting read-only
=============================================
==================== start Dual ====================
flash_open: flash_fd=9
Set: phy[4].reg[0] = 3900
Set: phy[0].reg[0] = 3900
Set: phy[1].reg[0] = 3900
Set: phy[2].reg[0] = 3900
Set: phy[3].reg[0] = 3900
Ralink HW NAT Module Enabled
switch reg write offset=2010, value=810004c0
switch reg write offset=2110, value=810004c0
switch reg write offset=2210, value=810004c0
switch reg write offset=2310, value=810004c0
switch reg write offset=2410, value=810004c0
switch reg write offset=2510, value=810004c0
switch reg write offset=2610, value=810004c0
switch reg write offset=2604, value=ff0000
ret 0, rtk_vlan_init
set vlan config: set vid 1, port = 4f, untag = f, fid = 0
ret = 0, set vid 1, port = 4f, untag = f, fid = 0
set vlan config: set vid 2, port = 50, untag = 10, fid = 0
ret = 0, set vid 2, port = 50, untag = 10, fid = 0
ret = 0, set port = 0, pvid = 1, pid = 0
ret = 0, set port = 1, pvid = 1, pid = 0
ret = 0, set port = 2, pvid = 1, pid = 0
ret = 0, set port = 3, pvid = 1, pid = 0
ret = 0, set port = 4, pvid = 2, pid = 0
Set: phy[4].reg[0] = 3100
Set: phy[0].reg[0] = 3100
Set: phy[1].reg[0] = 3100
Set: phy[2].reg[0] = 3100
Set: phy[3].reg[0] = 3100
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
portmap format error, should be of length 7
vconfig: ioctl error for add: File exists
vconfig: ioctl error for add: File exists
device eth2 entered promiscuous mode
device eth2 left promiscuous mode
set hello timer failed: Invalid argument
device eth2 entered promiscuous mode
device eth2.1 entered promiscuous mode
br0: port 1(eth2.1) entering forwarding state
br0: port 1(eth2.1) entering forwarding state
set hello timer failed: Invalid argument
device eth2.7 entered promiscuous mode
br1: port 1(eth2.7) entering forwarding state
br1: port 1(eth2.7) entering forwarding state
set hello timer failed: Invalid argument
device eth2.8 entered promiscuous mode
br2: port 1(eth2.8) entering forwarding state
br2: port 1(eth2.8) entering forwarding state
set hello timer failed: Invalid argument
device eth2.9 entered promiscuous mode
br3: port 1(eth2.9) entering forwarding state
br3: port 1(eth2.9) entering forwarding state
vconfig: ioctl error for add: File exists
Set: phy[5].reg[0] = 0800
Set: phy[4].reg[0] = 0800
Set: phy[3].reg[0] = 0800
Set: phy[2].reg[0] = 0800
Set: phy[1].reg[0] = 0800
switch reg write offset=14, value=405555
switch reg write offset=e4, value=3f
Set: phy[5].reg[0] = 3300
Set: phy[4].reg[0] = 3300
Set: phy[3].reg[0] = 3300
Set: phy[2].reg[0] = 3300
Set: phy[1].reg[0] = 3300
Init handler: lan
Init handler: dhcpsrv
Init handler: stp
Init handler: reset_btn
Init handler: watchdog
Init handler: wlanap
flasramtd_erase: addr:1fc0000 len:1000
h_open: flash_fd=9
ramtd_write: to:1fc0000 len:0
ramtd_write: to:1fc0010 len:0
ramtd_write: to:1fc0000 len:0
Length of MAC:6
mac:ac:f1:df:d8:71:5f:
----
mac:ac:f1:df:d8:71:60:
----
register rt2860


=== pAd = c04f2000, size = 795312 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc04e0000, csr_addr=0xc04e0000!
This is RT5592 EP version!
rtmp_nv_init:pAd->MC_RowID = 0
E2P_OFFSET = 0x00040000
rdlen [4096]   len[4096]