[资料] 创想 LP2400NT 无线客户端 TTL 刷UBNT

[复制链接]

7486060

20 回帖	768 积分	54 小时在线时间

中尉

注册时间: 2011-11-27

金币: 712 个

威望: 3 个

荣誉: 1 个

发消息

累计签到：17 天
连续签到：0 天
[LV.20]漫游旅程

发表于 2015-3-15 15:27

本帖最后由 7486060 于 2015-4-12 18:04 编辑

创想LP2400NT无线客户端  刷UBNT可直接用TTL线加网线方法刷入ar7240+ar9285-UBNT编程器固件下载地址：http://pan.baidu.com/s/12gcsY

也可刷入不死 U－BOOT ，(u-boot-ar7240-wnr1000v2.bin) 然后再从不死 U－BOOT WEB页面ubnt openwrt DDwrt 等固件
U-Boot 1.1.4.7 (May 10 2011)
Board: Linkpower LP2400NT board (rev 2.0)
DRAM:  32 MB
Flash:  8 MB
Net: eth0, eth1
Hit any key to stop autoboot:  1 0
## Booting image at 9f050000 ...
Image Name: LP2400NT
Created:    2011-09-04  18:15:54 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 772177 Bytes = 754.1 kB
Load Address: 80002000
Entry Point:  80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting...
Please press Enter to activate this console.
WIRELESS login:

U-Boot 1.1.4.7 (May 10 2011)
Board: Linkpower LP2400NT board (rev 2.0)
DRAM:  32 MB
Flash:  8 MB
eth0, eth1
Hit any key to stop autoboot:  1 0
ar7240> <INTERRUPT>
ar7240> printenv
bootdelay=1
baudrate=115200
mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k
(rootfs),256k(cfg),64k(EEPROM)
bootcmd=bootm 0x9f050000
serverip=192.168.1.100
bootargs=console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/init verbose
ethaddr=00:74:7e:00:00:77
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.1
ethact=eth1
ar7240> tftp 0x80000000 1.bin
Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
Filename '1.bin'.
Load address: 0x80000000
Loading: *##########################
done
Bytes transferred = 131072 (20000 hex)
ar7240> erase 0x9f000000 +0x20000
.. done
Erased 2 sectors
ar7240> cp.b 0x80000000 0x9f000000 0x20000
Copy to Flash... done
ar7240>

ar7240> re
Resetting...
U-Boot 1.1.4 (Jan 15 2015 - 11:31:13)
AP91 (AR7240 - Python 1.2) U-Boot
DRAM:  32 MB
Flash: Winbond W25Q64 (8 MB)
Using default environment
Clocks: CPU:400MHz, DDR:400MHz, AHB:200MHz, Ref:5MHz
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
Fetching MAC Address from 0x9f01fc00
Fetching MAC Address from 0x9f01fc00
GMAC: cfg1 0xf cfg2 0x7114
eth0: 00:23:45:67:89:ab
eth0 up
GMAC: cfg1 0xf cfg2 0x7214
eth1: 00:23:45:67:89:ac
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Push the reset/WPS button for 3s to start Web Failsafe.
Hit any key to stop autoboot:  5 4 3 2 1 0
eth0 link down
dup 1 speed 1000
Web console started at 192.168.1.1
GET / HTTP/1.1

゛o吖_頭ゞ

195 回帖	1095 积分	277 小时在线时间

上尉

注册时间: 2012-12-21

金币: 808 个

威望: 2 个

荣誉: 1 个

发消息

累计签到：73 天
连续签到：0 天
[LV.100]试剑无线

发表于 2017-10-17 21:35

                                 　　　请问大神这个怎么操作

也可刷入不死 U－BOOT ，(u-boot-ar7240-wnr1000v2.bin) 然后再从不死 U－BOOT WEB页面ubnt openwrt DDwrt 等固件
U-Boot 1.1.4.7 (May 10 2011)
Board: Linkpower LP2400NT board (rev 2.0)
DRAM:  32 MB
Flash:  8 MB
Net: eth0, eth1
Hit any key to stop autoboot:  1 0
## Booting image at 9f050000 ...
Image Name: LP2400NT
Created:    2011-09-04  18:15:54 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 772177 Bytes = 754.1 kB
Load Address: 80002000
Entry Point:  80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting...
Please press Enter to activate this console.
WIRELESS login:

U-Boot 1.1.4.7 (May 10 2011)
Board: Linkpower LP2400NT board (rev 2.0)
DRAM:  32 MB
Flash:  8 MB
eth0, eth1
Hit any key to stop autoboot:  1 0
ar7240> <INTERRUPT>
ar7240> printenv
bootdelay=1
baudrate=115200
mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k
(rootfs),256k(cfg),64k(EEPROM)
bootcmd=bootm 0x9f050000
serverip=192.168.1.100
bootargs=console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/init verbose
ethaddr=00:74:7e:00:00:77
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.1
ethact=eth1
ar7240> tftp 0x80000000 1.bin
Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
Filename '1.bin'.
Load address: 0x80000000
Loading: *##########################
done
Bytes transferred = 131072 (20000 hex)
ar7240> erase 0x9f000000 +0x20000
.. done
Erased 2 sectors
ar7240> cp.b 0x80000000 0x9f000000 0x20000
Copy to Flash... done
ar7240>

ar7240> re
Resetting...
U-Boot 1.1.4 (Jan 15 2015 - 11:31:13)
AP91 (AR7240 - Python 1.2) U-Boot
DRAM:  32 MB
Flash: Winbond W25Q64 (8 MB)
Using default environment
Clocks: CPU:400MHz, DDR:400MHz, AHB:200MHz, Ref:5MHz
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
Fetching MAC Address from 0x9f01fc00
Fetching MAC Address from 0x9f01fc00
GMAC: cfg1 0xf cfg2 0x7114
eth0: 00:23:45:67:89:ab
eth0 up
GMAC: cfg1 0xf cfg2 0x7214
eth1: 00:23:45:67:89:ac
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Push the reset/WPS button for 3s to start Web Failsafe.
Hit any key to stop autoboot:  5 4 3 2 1 0
eth0 link down
dup 1 speed 1000
Web console started at 192.168.1.1
GET / HTTP/1.1
　　　　　　　　　　　　　　　　　请问大神这个怎么操作

签到......

huxubo